Jump to content
SAU Community

Gb: R32, R33, R34 Skyline Carbon Fibre And Fibreglass Bits


Recommended Posts

Hope this helps make up your mind, eyelids in silver.

Yes they look great in silver!! Nice bonnet too!! Thanks I feel a bit more confident getting the FG ones. Thanks for posting the pic!! :)

  • Replies 272
  • Created
  • Last Reply

Top Posters In This Topic

Hi all,

I've been told that there was a "mistake" batch of R34 CF Sills in "Silver CF"... apparently they are very unhappy with this batch as the color was never meant to be (supposed to be normal black CF)

Anyways, quality wise they are perfect - just a matter of colour.

Anyone keen on Silver CF?

How long are the sills (I want to know if they will fit on a 4 door) ... and how much $$$ are we talking?

NEED MORE INTEREST ON R34 CF SILLS!!!

The guys overseas are being complete pricks on this item for some reason and will only give me the same price as before if I can move 10 units!

Please don't worry; I'm in heated negotiation with them atm and will try my best to get them at the same price. However, if anyone else is interested; time to jump on the bandwagon!

I'd really like a set of the B-Pillar carbon fibre moulds for an R34GTT...think they'll be making these again?..or should I say, could you find out if they will?

  • 3 weeks later...

OK ladies and gentlemen;

I have confirmed the following (yeah about time I know)

* 10 x FG R34GTT Eyelids

* 1 x CF R34GTT Door Sills

* 2 x FG R34GTT Bonnet Lips

Please PM me if you would like to get in on this "limited" order... I will be PMing all of you who have expressed interest in the above mentioned items.

Obviously not all can be served for those items in limited stock.

Thanks

Stan

Massive batch of PMs sent out - remember; as per the PM - first in first serve for those 2 items in limited stock.

Justin; I'm not going to promise you anything yet - I will have to get in contact with this guy and ask for confirmation. I don't want to promise something I can't deliver that's all.

If he's all good with it then yeah, we'll go ahead with it :P

satanic

any word on that r34 carbon fibre boot lid for me yet mate?

thanks

Justin

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
    • It sounds like you want what the Toyota Landcruisers have for their roof racks. Wanna know what you end up with? Rust holes in the roof, and water everywhere...
    • Discovered today that if I select reverse first and take my foot off the brake, then select drive, the drive indicator light works and so does the tiptronic gear indicator. 
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Does anyone here have any ideas?   Cheers guys
×
×
  • Create New...