Jump to content
SAU Community

Recommended Posts

hey all

i have a gt35 journal bearing turbo 700hp rated

front housing is 0.70 A/R with 58mm wheel 4" inlet

rear housing is a 1.06 A/R with 62mm wheel and is a t3 split pulse flange with 3.75 v-band outlet

currently has an internal wastegate with 18psi actuator but can easily have an external adapted to the rear housing as u will see in the pics

this turbo has not been run since being rebuilt about 8 months ago

this turbo would be good for any type of rb25det/26det/30det

will swap for something smaller and in good condition anything with a t3 flange and maybe a cash adjustment depending on the turbo your offering, so let me know what u have got

will sell for $900 ono

any questions pm me or call me on 0422258117

cheers

brad

dsc00677di7.th.jpg

dsc00680az1.th.jpg

dsc00676uu0.th.jpg

dsc00675ah4.th.jpg

dsc00674nq6.th.jpg

dsc00669si8.th.jpg

Edited by RB20/30Det_VL

swap for r33 stock turbo in good condition, plust adjustment.

What did u have this turbo on? i see its a garret but it is not a truck turbo is it? with the split pulse design i have to ask.

tmc_2 sent pm

no its not a truck turbo, this was on my 25/30det and u find that most of the larger turbos with 0.82 or 1.06 rear housings will have split pulse housings

cheers adriano

as adriano said i have moved back home and it is of no use to me due to destroying my 25/30det months ago, now have my old rb20det and this turbo is to big

aquariuz6 - full boost (18psi) was seen at 3800rpm with supporting mods

and has never been used since rebuild, also has a 360 degree thrust bearing

brad,

sorry to hear your toolbox and turbo were stolen from work

already had the R33 gear packed up ready to post to you....took me quite a while...... like a jigsaw with padding

anyhow i'll keep an eye out on all the forums i'm on in case the w#nker tries to unload it....it's pretty oddball so i doubt there'd be 2 for sale

regards

paul

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
×
×
  • Create New...