Jump to content
SAU Community

Recommended Posts

Slightly freaked out here. Have installed all the CDs libraries from the howto. Punched in my VIN Code and "model series can not be found for this vin no input model or model series" is the result. Tried someone elses ecr33 and got a result. Mine doesn't work. Typed in the model number:

ggkbrtfr33vdac---- and I got part of a result. It then accepted the vin number and gave me some details engine/mt etc. Did this happen to anyone else? Is this bad?

ecr33025105

Edited by axelmasok
Gives me the same error for that vin number, you sure you have it correct?

100% double and triple checked. The model number I have seems to be valid. The VIN as you see is not. I read somewhere about how the plate is attached to the firewall and to pick ones that have been tampered with....mine has two small plastic "rivets" that attach it to the firewall, the plate is thin and can get my fingernail behind it. Is this blue blate original?

Hi can anyone check out if anything interesting comes up with RA31GASMP-EC it's off my cefiro... Mainly because I'm trying to source brakes parts and the parts I got are WAY off, so need to know if it's a Touring/Comfort/Sport edition etc.

Many Thanks,

Grant.

Edited by QUIKBLADE
  • 2 weeks later...
  • 2 weeks later...
Can someone check this

VIN 6u9000ecr33107218

THANKS HEAPS! i cant seem to post new topics so id thought id do it here.

Hi Guys,

It would be appreciated if somebody could please check the following VIN on FAST for me.

6T91MPAAAN1BAD007

Thanks in advance.

Marc2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...