Jump to content
SAU Community

Recommended Posts

Bro,

My PowerFC in my 34 GTR doesnt make any noise but i notice my hand controller makes alot of noise.

Just holding it up and shaking it around will give you sounds like its not put together well and like something is loose on the inside.

If im not mistaken, my PowerFC unit fits snugly..

I took apart the hand commander by the 2 screws behind and it just looks like the board is somewhat loose so i used some blu-tack and i wedged a few pieces around to make everything tight and compact and closed it back up and now its really silent.

Hope it helps!

maybe a ticking relay? try watching ETC,SENSOR SW / CHECK when you notice the problem, do you see anything going on and off rapidly (block dot flashing)

ok ill give that a go when i go drive in a min...

if it is that what can i do about it?

ok took the car for a drive and did the things u suggested paul.....

know went to 8 at the most and the sensor check didnt seem to do anything strange had some come on and off as i pushed the pedal but nothing flashing rapidly.....

anyone else got any ideas....

Im going to check to see that it is mounted really well shortly does anything in the unit cause it to vibrate if not mouted tight?

Its a fast vibration sound and only happens when accelerating hard.

Maybe it only sounds like it's coming from the passenger footwell?

Checked your exhaust manifold lately? Still got all the studs holding it on?

You didnt fit a Apexi boost control kit as well did u? I had mine in just last week n the solenoid valve makes a rattle when it comes on boost, alot louder than i expected. Apparently the Apexi valve is one of the loudest ones around so i was told.

You didnt fit a Apexi boost control kit as well did u? I had mine in just last week n the solenoid valve makes a rattle when it comes on boost, alot louder than i expected. Apparently the Apexi valve is one of the loudest ones around so i was told.

this will be your problem, i have an avcr and it makes the same noise, farken annoying sounds similar to detonation, which freaks me out sometimes.

Some are louder than others, a good friend has one that's almost twice as loud as mine, next time your car is on the dyno try and get close to the boost controller solenoid, you will here that little tapping noise. ;)

Yup rattles quick just as it comes on boost, its annoying so u may have to just put up with it. When i first had mine in, i thought it was my turbo wheel hitting the housing, took out the intake pipe, checked the shaft for play n was all good. Took me awhile but i soon realised that it was just the BC valve.

Perhaps a good pair subs will help drown the noise out......

Im trying to overcome the drone from my Blitz catback, now that's loud, even hurts my ears if im in the car for awhile...

yeah i got the boost control kit as well..... maybe it is when it comes on boost....

ill try unplugging it and putting it back in agian see how that goes

G Force is the rattle really quick and rappid.....?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...