Jump to content
SAU Community

Recommended Posts

hey guys i got my old wheels for sale due to having a wide body, there 9inch alround withe 245 alround,

front tyres would have bout 40% tread and rears bout 70% i want $700 for them

they will be off the car by the end of the week when i get my new wheels.

and will take better photos when off

u can contact me on

0404961159

2 wheels have have slight gutter rash tyred to take fotos of them

post-16324-1158749603.jpgpost-16324-1158749312.jpgpost-16324-1158749229.jpgpost-16324-1158749755.jpgpost-16324-1158749964.jpgpost-9094-1127729082.jpgpost-16324-1158750845.jpgpost-16324-1158750948.jpg[attachmen

=57015:attachment]post-16324-1158750988.jpg

post-16324-1158750722.jpg

post-16324-1158750972.jpg

Edited by ali-turko
Link to comment
https://www.sau.com.au/forums/topic/133848-sparco-wheels-cheap/
Share on other sites

mate i dont no the exact off set but i would say the would be around the +20, but had the rears on my gfz gtst at one stage but not sure bout the fronts the might fit i really dont no, but ur welcome to come and tryem on when there off

mate i dont no the exact off set but i would say the would be around the +20, but had the rears on my gfz gtst at one stage but not sure bout the fronts the might fit i really dont no, but ur welcome to come and tryem on when there off

They should fit GTS-t if you put them on one before. front and back offset is the same on GTS-t's i have changed my wheels around before.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...