Jump to content
SAU Community

Recommended Posts

yep, i just followed these instructions here

http://www.skylinesaustralia.com/forums/in...=57&t=58778

its not hard, i reakon i did it in an hour. R33s have electronic hicas so theres no messing about with power steering lines. its just a case of unbolt the hicas motor and bolt in the locker bar & yep u will need a rear wheel allignment afterwards. ;)

  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

no worries for the lend of the power tools guys - I wish I didn't already have plans, I would have stayed to help you. Missed Darren too - what a bummer .... I must have left too early. Ah well next time!

Yeh i think i just missed you too, should have got off ma ass earlier and come around! The whole Barbie and work on car thing sounds like a good idea, will have to pick a nice day and not toooooooo freakin hot either, otherwise it will turn into a drink beer and sit on our ass day......... which i'm not saying is a baaaad idea :(:D

lol .... I am sure that is what the day would turn into anyhow .... maybe pick a 35 degree day, we can start at 9am, mod until 12pm, jump into the spa/drink beer/eat barbie/play darts & pool until 4pm when it cools down a little, then back into some more modding until 7pm, then repeat step 2 :D

My latest pet project (apart from my 'leatherette' seats) is to put some 10mm chipboard on the drivers side 'wall' of the boot (behind the lining) in order to mount a fire extinguisher, some spare fuel, spare water and tools. Not a big job, but would require removing the boot skins, measuring up, cutting the chipboard to shape, securing/deadening the chipboard and restoring the boot lining. It is the sort of job we could do to 6-10 Skylines at once if anyone else was interested.

lol .... I am sure that is what the day would turn into anyhow .... maybe pick a 35 degree day, we can start at 9am, mod until 12pm, jump into the spa/drink beer/eat barbie/play darts & pool until 4pm when it cools down a little, then back into some more modding until 7pm, then repeat step 2 :D

great in theory but as well all know in practice unexpected sh!t happens and it takes way longer then expected. you know that bolt we tried to get off andrew? well we ended up screwing it up again - thank gosh we later had access to vice grips.

DOH! ... I was going to ask you how it went.

And yes, as we have discovered many times it always takes much longer to do than you think - but once we got a template done it would be dead easy to do more.

So, is anyone up for this project, or have another one in mind? I might just organise a day in a few weeks time - I'm thinking maybe 14th October? (Week after dyno day). I would prefer to do it before I head to Singapore .... but could wait until I got back.

My latest pet project (apart from my 'leatherette' seats) is to put some 10mm chipboard on the drivers side 'wall' of the boot (behind the lining) in order to mount a fire extinguisher, some spare fuel, spare water and tools. Not a big job, but would require removing the boot skins, measuring up, cutting the chipboard to shape, securing/deadening the chipboard and restoring the boot lining. It is the sort of job we could do to 6-10 Skylines at once if anyone else was interested.

sounds good i have a fire extinguisher floating in my boot and i want to mod the back where thre rear cover covers the boot battery and put sum MDF with twin 10" subs this is long way off though

**edit**

i found this after looking for boot pictures

http://autospeed.drive.com.au/cms/A_1212/article.html

Edited by Madaz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...