Jump to content
SAU Community

R32 Gtst, Running Lean? Popping Sounds? Airleak?

BOOSTA

By BOOSTA,
in Engines & Forced Induction

 Share

Recommended Posts

BOOSTA Collaborator

BOOSTA

Posted
Posted

Hey guys,

I've searched through various posts to try and find a solution but im just not sure if any of the other posts have the same problem.

I currently have a

1989 R32 gtst

Rb20det

3" hiflo cat and bee-r exhaust system (standard dump pipe)

HKS pod filter

Standard Bov

HKS spark plugs (havent changed since buying car as in good condition)

Standard Intercooler

Standard BOOST 9psi (spikes 10-11)

Since buying the car 5mnths ago it has been fine but for the last 2 weeks the car has been excessively backfiring,popping all over the place ( during gear changes, only when i come off throttle).

Its not missing during any part of the rev range but when i start the car its very lumpy, like barely wants to start running but then speeds up and idles fine.

It seems to be starting to lack power under full throttle and im abit worried about if it might be leaning out but i dont know how to check to see if it is.

Could it be a airleak at the exhaust manifold or standard dump pipe?

The heat shield over the standard dump pipe is getting pretty rusted so im wondering if removing it will cause any issues with heat?

Someone drove beside me the other day after following me up a hill and asked if my car was leaning out? They did say i wasnt blowing any black smoke under full throttle etc and getting pops/backfires everytime i change gears or just release the throttle?

Im only a 2/3yr apprentice mechanic for kmart tyre and auto and I dont have the amount of $$ to get it on a dyno so was wondering if theres any way i can check stuff to see if certain things are working ok? my clutch is starting to slip alil so i have to save for that aswell so if anyone can help with any idea's or ways to help try and sort out whats going on would be greatly appreciated.

Many Thanks

Pete (BOOSTA)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GoHashiriya
      R34 Skyline Sunroof Won't Tilt/Vent

      By GoHashiriya · Posted

      Actually, that's not entirely true. It's also the same motor in the 1st gen Nissan Cube but they're rare as hen's teeth.  
    • Duncan
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By Duncan · Posted

      Yeah it is always worth testing and balancing actuators out of the box, just set the pressure regulator on a compressor very low (eg 5 psi) and increase it slowly to see when they both move.....unfortunately while you may be able to adjust the length of the actuator rod to minimise any difference, the actual pressure they move from is not adjustable so you need a well matched pair. And yes, the VCAM is probably contributing; the earlier in the rev range they come on boost and the slower the revs build (I think your demo was in 5th), the more you notice it.  Driving at WOT through 1st, 2nd, 3rd etc you will probably never hear it as any shuffling starts and is over super quickly
    • Dose Pipe Sutututu
      Shoota's R33 GT-R RB30/26

      By Dose Pipe Sutututu · Posted

      oh they were with that motor, you need to remove the engine to change the spark plugs (don't have to, but it does make it easier)
    • nouveau_poor
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By nouveau_poor · Posted

      I certainly fall into the annoyed camp, but glad to hear that if it's happening at low boost then I'm not likely going to blow a turbo and end up with metal shards in my oil. Just feels like it prevents me from really driving it without hesitation and "peak" performance. Wonder if it's the VCAM, it did an impressive job of shifting the torque curve and faster spool, but maybe now it's "too fast" and there's too much air for how open the throttle is.  Based on some other threads, will also do some reading on synchronizing the actuators. They are the default actuators that come on the Garrett's and I would think they would be set the same coming from the factory, but if the turbos don't actually work exactly the same way at the same time as previously mentioned, it would be worth making sure the actuators are actuating together properly
    • GoHashiriya
      R34 Skyline Sunroof Won't Tilt/Vent

      By GoHashiriya · Posted

      I went down this rabbit hole before, ended up sourcing a motor from the UK (I'm in Japan) which also didn't function correctly. With the original motor, I disassembled it and reassembled it and it works somewhat, sometimes. What I could deduce from all my screwing around is that there is calibration of the gears on the inside of the motor and two ramps on the main gear which activate switches that operate the motor and move the sunroof either to retract into the roof or tilt. Where I got stuck was that, it seemed in my case that one or both of the switches that are activated by the ramp on the gear did not always activate and thus the motor did not move, causing it to sometimes not retract or tilt (apologies, I've forgotten which way it didn't work.).  Of course this part is discontinued at Nissan now, it's the same part in the S15 but no other models. I also contacted the manufacturer of the component for schematics - forgot the name, they're based in Gifu - but they declined to share the information due to being bound by an NDA, sadly. Looking through my pictures now, it seems I last had a crack at this in 2022. See, I so kindly wrote "open" and "close" next to the switches. If you figure it out, please do tell me. Those little switches, with the red buttons may need to be replaced.
×
×
  • Create New...