Jump to content
SAU Community

Recommended Posts

Without walking out to the shed... From memory its a redish colour, you will need 1-2 bottles for a flush (someone else will need to confirm that one) I guess you might get it for $25 if your lucky. Dude it aint that much hey, the time and mone you waste looking for it... Maybe just ask your mechanic if he can get it for you at trade price?

Figured I'd probably need 2 bottles.

I can get trade price, but no trade outlets sell Motul (that I know of).

Main thing I wanted to know was colour...hard to tell when your fluid has been fully flushed out if the new stuff is the same colour as the old.

maybe i'll use whats left over an change the clutch fluid

Unique autos and JustJap in sydney both sell it for $25. The Unique auto guy reakoned i'd need two bottles. I'll be doing mine this weekend thanks to this forum Fluid flush info link

Rgs,

Kot

I have done a full flush with 500ml before but to be thorough I normally use about 600-700mls. Annoying isn't it.

You do realise that hard core brake fluid is even more hydroscopic than the normal stuff and needs to be changed much more often.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...