Jump to content
SAU Community

Recommended Posts

  • Replies 74
  • Created
  • Last Reply

Top Posters In This Topic

I guess he doesn't come on here often. 25 questions to be answered so far.

Well in the vid the guy said 10 seconds and 250km/h. That's some serious MPH, imagine if he could get a 100% hook up.

I love how last thread you posted everyone was like, 'oh yeah it's ok, not bad, don't like this or that', now it's like, 'f**k yeah, sounds awesome'.

post-7531-1158410326.jpgpost-7531-1158410882.jpgwell its stilla rb25 wont even go into how much the engine cost but on pump fuel no nitros its making 585hp at the rear...

this jamberoee i will have a 100hp shot of nitros running c16 fuel and i just took out my trust 6 speed dog box and put in a powerglide with a trans brake i am hoping for in the 9'' s does anyone no the best time a r33 with rb25 has done ? and i dont mean rb25 head with rb 30 bottom end just a full house rb25 like mine. thanks and thanks for your comments i am hoping to tub the arse end next year ..

oh yea just put fully adjustable control arms in it also so the slicks dont camber in on take off this should be fun .....

post-7531-1158410326.jpgpost-7531-1158410882.jpgwell its stilla rb25 wont even go into how much the engine cost but on pump fuel no nitros its making 585hp at the rear...

this jamberoee i will have a 100hp shot of nitros running c16 fuel and i just took out my trust 6 speed dog box and put in a powerglide with a trans brake i am hoping for in the 9'' s does anyone no the best time a r33 with rb25 has done ? and i dont mean rb25 head with rb 30 bottom end just a full house rb25 like mine. thanks and thanks for your comments i am hoping to tub the arse end next year ..

oh yea just put fully adjustable control arms in it also so the slicks dont camber in on take off this should be fun .....

good luck marty.

hope u do well will be good to see it improve again anyway.

post-7531-1158410326.jpgpost-7531-1158410882.jpgwell its stilla rb25 wont even go into how much the engine cost but on pump fuel no nitros its making 585hp at the rear...

this jamberoee i will have a 100hp shot of nitros running c16 fuel and i just took out my trust 6 speed dog box and put in a powerglide with a trans brake i am hoping for in the 9'' s does anyone no the best time a r33 with rb25 has done ? and i dont mean rb25 head with rb 30 bottom end just a full house rb25 like mine. thanks and thanks for your comments i am hoping to tub the arse end next year ..

oh yea just put fully adjustable control arms in it also so the slicks dont camber in on take off this should be fun .....

The guy with Project Gtst in the UK has run a 9 with a full RB25. Did Fred build the glide for you? Awesome stuff!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • 21 is explicitly the coils detected as the issue. Is it guaranteed the actual issue? No. Just the ECU thinks it is. When you say rattling, describe it better, get an audio clip as best you can if possible.
    • Yea got me coppers. Bad news is I just put them in and the car still has the light and shakes. I also noticed I hear like rattling coming from the exhaust piping right under me. Does 21 also have a possibility of being O2 sensors?   So, coil packs are good, the harness is good, the MAF is working, and obviously the spark plugs just replaced and working.
    • Make sure you drop the GTT base tune back in, and set your injectors again, this will remove anything playing up with it you may have removed. Possibly lean there as it's normally a fast transient going THROUGH atmospheric pressure, and a turbo motor would then quickly go richer as boost builds. The only worry you MIGHT have is ignition timing, as the DE is higher compression than the DET from memory. But again, you're not in boost, so the DE motor will be a lot more forgiving at atmospheric.   Get Murray, Kinkstahs, and Johnny's input on tuning haltechs, those guys have played with tuning enough in the past to be able to help now you're past the trouble shooting stage of the MAP issue
    • @Rusty NutshI mate. Do you have a pinout diagram for the na neo auto ecu? 
    • Yeah thats the plan now. 🤞
×
×
  • Create New...