Jump to content
SAU Community

Recommended Posts

So after finally destroying my best lap time at Eastern Creek, courtesy of running DJ-01s, i have now noticed i have a bloody big blister down to canvas on my front right tyre.

Obviously turns 1, 2, 8 and onto the straight (10,11,12) stress the right side tyres.

When bolting on the tyres the dealer did advise that the grippier rubber will have me wearing the outside of the tyre, as i wouldnt be running enough camber or toe to get the most out of the tyre (or get the best endurance/wear out of the tyre)

So currently im running : Front - Camber - 2.1deg

Castor - about 5.5

& no Toe

So East Coast will be setting up the front as to not destroy fronts, but compromise is it will destroy my normal road rubber.

So directed at the guys who run the DJ01s, Potenzas, Advan etc compounds, how do you combat destoying EXPENSIVE track rubber with street suspension settings, or do you put up with poor road wear in order to look after your track rubber.

... and for the record i was amazed at the performance increase. I was carrying about 15-30 km/hr more speed thru corners, and car braked a lot better. And this was with a susp setup that would start to understeer after about 4 laps due to the blistering of the outside of the front tyres.

Link to comment
https://www.sau.com.au/forums/topic/13441-suspensiontyre-questions/
Share on other sites

I have the same problem...I have similar figures for camber etc...

I use $110 kellys to drive around on...wear rating of 430 or thereabouts...you cant wear them out I promise you. You just need to take your time in the wet.

2nd option find a piece of crap to drive every day and use the line for what it was intended...going really fast.

By the way how did you decide 2.1 camber was good, just out of interest? How do you adjust your camber?

Russ

Originally had more camber in the front, which to drive seemed to help turn in, or give sharper response, except daily tyre wear was terrible. Current 2.1 seems to be a little kinder on road tyres, but obviously not enough for track rubber with its additional grip

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
×
×
  • Create New...