Jump to content
SAU Community

Recommended Posts

Theres lots of posts about spark plugs on here but ive got a question.. :D

R33 gtst usual mods standard turbo..

Re-moved "iridium nismo 8" spark plugs from car (god knows what these are? 0.8 gap?)

Put in NGK Iridium BKR5EIX-11, gapped to 0.8 (i know you're not supposed to gap iridiums).

I wanted to put in BKR6EIX, but id allready bought the BKR5EIX.

Running with the BKR5EIX 's the engine wasnt even coming onto boost it was just pinging and spluttering everywhere.. with low down torque not really there either..

I put the Old iridium nismo 8 plugs back in and all is now good and back to normal..

So im guessing the Iridium BKR5EIX (5 heat rating) is too hotter a plug?

I know i should have the 6 heat range, BKR6EIX, for the kind of mods i have, but would the 5 really do this kind of thing to the performance of my 33?

Any feedback would be great.

Looks like ive just wasted $100 on the damn wrong heat range sprakies.. :( , Dumbass.

Link to comment
https://www.sau.com.au/forums/topic/135310-hot-spark-plugs/
Share on other sites

Theres lots of posts about spark plugs on here but ive got a question.. :nuke:

R33 gtst usual mods standard turbo..

Re-moved "iridium nismo 8" spark plugs from car (god knows what these are? 0.8 gap?)

Put in NGK Iridium BKR5EIX-11, gapped to 0.8 (i know you're not supposed to gap iridiums).

I wanted to put in BKR6EIX, but id allready bought the BKR5EIX.

Running with the BKR5EIX 's the engine wasnt even coming onto boost it was just pinging and spluttering everywhere.. with low down torque not really there either..

I put the Old iridium nismo 8 plugs back in and all is now good and back to normal..

So im guessing the Iridium BKR5EIX (5 heat rating) is too hotter a plug?

I know i should have the 6 heat range, BKR6EIX, for the kind of mods i have, but would the 5 really do this kind of thing to the performance of my 33?

Any feedback would be great.

Looks like ive just wasted $100 on the damn wrong heat range sprakies.. :) , Dumbass.

Yah think you have got yourself some hot plugs, put it ip in ebay and sell at half the cost. At least you can recover something back.

Link to comment
https://www.sau.com.au/forums/topic/135310-hot-spark-plugs/#findComment-2517133
Share on other sites

you can't go past the plugs with the code BCPR6ES. they are only copper and are about $3 each (better than about $20 each for iridiums). i've had mine in for about 10,000kms at between 12 and 14psi and they haven't missed a beat. it had iridiums in there and they were dead after 20,000ks. i'm going to change them again at the next oil change (at $24 a set, why not)

but a guy i know put platinum plugs in (heat range 5) and it pings like a bitch, and pops and farts. he took me for a spin in it last night, but he wouldn't listen when i told him his plugs where wrong (1 of those know-it-all types).

Link to comment
https://www.sau.com.au/forums/topic/135310-hot-spark-plugs/#findComment-2522759
Share on other sites

you can't go past the plugs with the code BCPR6ES. they are only copper and are about $3 each (better than about $20 each for iridiums). i've had mine in for about 10,000kms at between 12 and 14psi and they haven't missed a beat. it had iridiums in there and they were dead after 20,000ks. i'm going to change them again at the next oil change (at $24 a set, why not)

but a guy i know put platinum plugs in (heat range 5) and it pings like a bitch, and pops and farts. he took me for a spin in it last night, but he wouldn't listen when i told him his plugs where wrong (1 of those know-it-all types).

Sometime cheap is not necessary bad and expensive is not necessary good. The key is to choose the correct form, fit and function that cater to your engine. The BCP6ES are without the V groove, choose the BKR6E-11 (gap down when necessary) which cost around there too.

Link to comment
https://www.sau.com.au/forums/topic/135310-hot-spark-plugs/#findComment-2522802
Share on other sites

It all depends on the mods you have.

a mildly modded car shouldn't have major issues running a 5 as they are the stock replacement plug.

A 6 heat range plug is a good move with more boost up to about 1.1bar/16psi. bcpr6es/bkr6es is .8 copper out of the box, bcpr6e or bk.. is the v groove option.

A 7 over that up to low 20psi

I'd start with a 6 bcpr6es as they are cheap enough. If no good then make a few enquiries about the nismo plugs and try a copper 7.

Link to comment
https://www.sau.com.au/forums/topic/135310-hot-spark-plugs/#findComment-2522889
Share on other sites

cheers fellas..

Yeh ill try the bcpr6es hopefully the 6 heat range is better. didnt realise a 5 heat range would be so S!@T

I might even keep the old nismo 8 iridiums in there and just clean them gently..

Ive got the old typical coilpack hairline cracks too, might fix them up as ill probably need too one day anyway..

thanks for the confirmation about the plugs.

Lata.

Link to comment
https://www.sau.com.au/forums/topic/135310-hot-spark-plugs/#findComment-2539658
Share on other sites

hey i am more or less going through the same thing i have been using 7es in my 33 and have had no real problems went to enquire about iridiums and could get them for about $18.oo each and the same for platiniums but could not get them in 7,s ended back with old faithful bcp7es for grand total of $21.00 ,cheers

Link to comment
https://www.sau.com.au/forums/topic/135310-hot-spark-plugs/#findComment-2540931
Share on other sites

  • 2 weeks later...
Don't know if this has been said but you can't compare all plugs by their number e.g. 5 or 6 as some plug manufacturers hotter and colder plugs ranges move in opposite directions.

yeh cheers, i know, i was just talking about ngk's.

ill be going the $21 option too.. ;)

Link to comment
https://www.sau.com.au/forums/topic/135310-hot-spark-plugs/#findComment-2570605
Share on other sites

mine was missing on boost...heat shrinked my coils and gapped my plugs at 0.8 that fixed it...then turned the boost up to around 12psi and it started missing again so i went for the bcpr7es gapped at 0.8 and everytihing is now sweet! id definatly recomend going for the 7...+ it costs like 24 bux!

Link to comment
https://www.sau.com.au/forums/topic/135310-hot-spark-plugs/#findComment-2570952
Share on other sites

i'm using the bcpr6es and i'm running 14psi with stock coils. they pop and fart on the very odd occasion, but they are about 7000km old. i'm going to go to the 7 heat range on the new plugs, just to get the heat down.

Remember to check your colder plug for fouling...

NGK FAQ

Link to comment
https://www.sau.com.au/forums/topic/135310-hot-spark-plugs/#findComment-2571819
Share on other sites

You can't go wrong with the BCPR6ES plugs. I had a set of splitfire plugs in mine which cost around the $20 a plug mark. They lasted all of 3 weeks before they started missing. Then the car sat for 2 weeks in the spray shop and i went to pick it up and it wouldn't start!

A trip down to Autobarn and 6 x BCPR6ES later and they haven't missed a beat. This was in October last year as well so they're probably due for a change! :P

Link to comment
https://www.sau.com.au/forums/topic/135310-hot-spark-plugs/#findComment-2574762
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...