Jump to content
SAU Community

Recommended Posts

I just finished running the new motor in on the dyno and did a base tune

The vehicle has undergone alot of Development now

Engine

Nitrated R33 GTR crank

H beam Eagle Rods

Venoila 9.2 Comp Pistons

Tommie Head Gasket

Solid Lifter Conversion

Big cams

GT 1100 hp bb turbo

2 speed powerglide

2 stage single sprayer nos kits

It has made 485 rwhp on 10 psi @8500rpm

I will post the Dyno sheet on 2morrow with the run on 30 psi

hopefully make around 800 rwhp

I should be at the track in the next 2 weeks

I will also post picts with photos of the new engine bay and if someone can host a video clip ill appreciate it

Edited by MR331307
Link to comment
https://www.sau.com.au/forums/topic/135859-lnemup/
Share on other sites

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Hello everyone

I just did a safe tune on the vehicle and it made a total of 648 rwhp @ 30 psi on a 10.2 AFR

I am going to do some more Tuning on it to get it to 720 or so RWHP But im waiting on a MSD dis 4 before i can run more boost and before i start bumping up the timing.ill hit the track next wenesday night.Aiming in the 9`s somewhere

Hopefully towards the end of the year i can run in the high 8 area,

I havent installed the CHUTE yet but i will after i get back on wenesday.

ILL post up some Dyno Picts and Videos soon3

Its still the RB25 Block just with GTR crank,Eagle Rods,Venoila 9.2 comp Pistons.

The car makes power to 9000rpm which will be fun at the track

When everyone sees us up there come up and say hello

Edited by MR331307
Link to comment
https://www.sau.com.au/forums/topic/135859-lnemup/#findComment-2542799
Share on other sites

around 6300 without nitrous

but i got nitrous on till 18 psi so i can gety on boost quickly and it gets on boost around 5700

Ive had lnemup plates for around 4 years

and the venoila pistons are pretty good quailty so i shouldnt have a problem

Edited by MR331307
Link to comment
https://www.sau.com.au/forums/topic/135859-lnemup/#findComment-2544094
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • End game is to: - Remove all the slop from old worn parts - Adjust setup so that the wheels actually fit and the car is drivable (currently it is not because of the extreme rubbing on the guards).   Progress over the last couple of days, removed the rear hubs! Next steps: - Buy bushings - Replace bushings/bearings on hub - Reinstall
    • Cracked deck  And other cam snap stuff   
    • A few random issues have popped up since my last update. My WMI pressure sensor failed within about 10 minutes of it seeing liquid. It was a 20$ China special, so I'm not surprised. My name brand replacement should arrive today.  My power steering assist also decided to crap out last weekend. The usual, works for about 60 seconds after starting the car then I lose it. I dusted off my old copy of NDS and connected to the HICAS ECU. Code 4 for assist solenoid.... I tested the solenoid and it's fine.  I knew the day where my HICAS ecu would crap out would come, and I welcome it. It was the last HICAS part on the car that is now in the bin. I've ordered an SSR and I will control the power steering solenoid with my Haltech ecu. It will be nice to have proper speed referenced assist again after all these years.   
    • Haha I just finished the last season of TPB: Jail last month. I'm happy they're still pumping out episodes. 
×
×
  • Create New...