Jump to content
SAU Community

Recommended Posts

Should be getting my exhaust soon and was wondering if it is necessary for wastegate integration as part of the system.

If there is no wastegate integration is there a chance of blowing the turbo up and has the stock exhaust got this integration.

Dont really know what Im talking about so please let me know.

Andrew

Link to comment
https://www.sau.com.au/forums/topic/13590-wastegate/
Share on other sites

But with a wastegate pipe it improves............ the flow and reduces turbulence just after the turbine

turbulence i s the disruption of air ... if you have turbulence, then the air flow is not linear, and if the air isn't all going one way at the same time, you'll have a reduction in the flow and and increase in restriction

Link to comment
https://www.sau.com.au/forums/topic/13590-wastegate/#findComment-265811
Share on other sites

I recently got my dump pipe done and its been a fantastic improvement. I went with a single pipe with a really wide opening at the top. Having had a look at the standard pipe its obvious how much better this is. The stock one on the 32 has a cast iron flat section just about blocking the wastegate area off... its horrible.

A larger single pipe is probably enough for most people. And theres little guarantee it will be better if you buy one with a separate wastegate pipe. This is because it may rejoin too early or too late causing similar turbulence issues within the system.

You'll see improvements either way, however the difference between the 2 styles of dump pipes probably cant be felt on an arse dyno (only a real one).

Red17

Link to comment
https://www.sau.com.au/forums/topic/13590-wastegate/#findComment-266982
Share on other sites

I'm geting my exhaust done next week. I pikd up a exhaust housing gasket, $20 and have since taken to my exhaust guy. He is going to weld up a new plate and incorporate in a seperate wastegate dump.

the dump off the back of the turbo will be a rapid increase to 3', the wastegate pipe will be 1"1/2. The exhaust guy has recently done something similar to another GTST, but the wastegate pipe entered the system down near the cat convertor.

My question is - "is this TOO far back? I know the further back the better. But we are talkin about 1 - 1.5m here".

"should I also thermal wrap any of the dump pipe???"

btw full 3" zorst turbs bak with hi flo cat and rear muffy etc etc..

tks.....

Link to comment
https://www.sau.com.au/forums/topic/13590-wastegate/#findComment-271177
Share on other sites

opposed to GTS-t VSPECs whos comes in at a right agle :)

Whether apart of the normal exhaust or a seperate screamer pipe, that joins back into the main exhaust at any section, or not at all.. wont hurt your turbo..

Id say the ultimate is an exhaust dump, one pipe with a secondary wastegate screamer which never enters back into the main pipe. Thats my next goal when the exhaust comes off..again.

Link to comment
https://www.sau.com.au/forums/topic/13590-wastegate/#findComment-271415
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can u check this way it works for power supply?
    • These coils draw 10amps that what i read online
    • I appreciate the detailed explanation, think I understand now. I spent the better part of last night reading what I could about shuffle and potential solutions. I had replaced the OEM twin turbo pipe with an alternate Y pipe that is separated further away from the turbo. The current one is from HKS and I had a previous pipe that was separated even further away, both have shuffle. I had heard that a divider can be welded in to the OEM pipe to remove turbulence, and figure that aftermarket pipes that are more separated would achieve the same thing. From what I read, most people with -10 turbos get shuffle due to their size, though it's a bit less common with -5s on a standard RB26. I think Nismoid mentioned somewhere it's because OEM recirculation piping is common in Australia with -5 cars. It seems that the recommendation tends to vary between a few options, which I've ordered in what I think is most feasible for me:  1. Retune the MAP or boost controller to try to eliminate shuffle 2. Install OEM recirculation piping 3. Something called a 'balance pipe' welded onto the exhaust manifolds. I don't know if kits for this are available, seems like pure fabrication work 4. simply go single turbo My current layout is as follows: Garrett 2860 -5s HKS Racing Suction intake MAF delete pipes HKS racing chamber intake piping hard intercooler piping,  ARC intercooler HKS SSQV BOV and pipe Haltech 2500 elite ECU and boost solenoid/controller HPI dump pipes OEM exhaust manifolds HKS VCAM step 1 and supporting head modifications Built 2.6 bottom end All OEM recirculation piping was removed, relevant areas sealed off I'll keep an eye out for any alternative solutions but can get started with this.  Only other question is, does shuffle harm the turbo (or anything else)? It seems like some people say your turbo shafts will explode because of the opposing forces after a while and others say they just live with it and adjust their pedal foot accordingly. 
    • That worked out PERFECTLY! Thank you big time to JJ. He was able to swap me his stock diff. He drove all the way to me as well. Killer! Removal & install was pretty straightforward. The diff itself is HEAVY. So that’s a 2 man job.  Man does the car drive nice now! Couldn’t have worked out any better 👌
×
×
  • Create New...