Jump to content
SAU Community

Recommended Posts

is yours really high or something ?

well yes...

look who is asking the question.

im trying to problem solve why im getting a reading of 2.4volts at idle.

you said the other day that it should be below 1v at idle.

yeah off the bat 2.4 seems way too high

i'd be suprised if it was correct

if you rev it a few times

does it always go back to the same value?

are u sure q45 is selected?

no pipework leaks around the afm?

whats the voltage with the car set to ON but not running

a photo of SENSOR SW / CHECK with the car set to ON but not running and another pic of the car running, that shoud help. also confirm what is under SETTING, AIRFLOW

ingnition only = .160v

it starts around .350v then counts down.

when running its up in the low 2.2 - 2.4 volt range

well, the idle will be shagged if its saying 2.4v of AIRFLOW to the powerfc and there actually is jack all. its probably on half the load axis at idle. ie because its saying 2.4v on the load axis, its like halfway. it would be mega sucky idle, suprised it even runs

what pfc (ETC, PROG VERSION)

what intake piping (stock turbo duct?, custom?)

what air filter (pod, box, panel filter, open mouth?)

where is the afm (in front of turbo, after intercooler?)

can u get a photo of SENSOR SW / CHECK with car running

do u have someone local with a knock working q45 AFM ?

can u try the stock afm back on it ? does it give similar readings?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...