Jump to content
SAU Community

Recommended Posts

not the normal "pull the fuse" type question but here goes

I want to do some burnouts, I know it is best to remove the driveshaft but torque is still transfered to the front wheels, just not put down onto the ground due to well... lacking a drive shaft :)

Soooooo

- if i remove the drive shaft do i still get "full" power to the rears for roasting or only 50% as the other 50 is being transfered through the imaginary drive shaft

or

- if by removing the fuse AND drive shaft, i eliminate the normal "residual pressure" issue will i get more power to the rear?

Hope you all understand what i am asking here...

Link to comment
https://www.sau.com.au/forums/topic/136169-burnouts-in-stagea-question/
Share on other sites

I have pondered this myself Alex,

Depending on how the transfer-case actually works and how the power is "split"... I guess in theory if the front shaft is removed and the 4WD system is still active the clutch packs will be compressed but as they have nothing rotating them they will just sit there happily. The output will be spinning away on the transfer-case (where the front shaft was connected) as will the rear shaft (driving the rear wheels) How much power does it take to spin the disconnected transfer-case? I guess that would be "the loss", and as it is just free-wheeling I can't see how it would drag too much power from the rear drive...

Interested to hear what the actual answer is, but I won't be dropping any wheelies!

I think Japsphere has a good example of how it didn't effect his car on the dyno with a great rear-wheel figure from a stock car.

Cheers

Luke

turning the big chain and gear in the transfer case that drives the front shaft wont take much power at all, though its one damn heavy duty setup when u look inside the transfer case. i drove around in 2wd with no front shaft for the whole 1200km without a hitch and damn did it do some crazy donuts and skids :)

oh the memories :)

wont be long until i do it again with alot more power and ill be sure to get a video of it when i do ;)

i got pics of the transfer case internals on my other hard drive, ill post them up when i get time to show ya's whats inside the case

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
×
×
  • Create New...