Jump to content
SAU Community

Recommended Posts

Hey guys, currently got a problem with my r33 gtst.

It is missing when it is under load. If u rev it when the car is stationary it will not miss if you gradually build the revs up. But if you rev it once then go at it again before the revs come back down it will miss.

It misses when you are driving aswell if you start to put the foot into it. The car also blows out a puff of black smoke when it misses.

Its not the coil packs and its not my inlet piping (cant find a leak).

Has anyone got any ideas as to what it could be?

Im think maybe i should change my plugs anyway but im doubting it would be the problem.

Thanks, Mike.

Link to comment
https://www.sau.com.au/forums/topic/136683-r33-missing/
Share on other sites

Hey guys, i changed the plugs today and it made no difference at all. My AFM is only like 6 months old and has been used stuff all so i dont think that it is that. Is it possible to be the o2 sensor?

Anyone else got any ideas?

Thanks, Mike

Link to comment
https://www.sau.com.au/forums/topic/136683-r33-missing/#findComment-2543572
Share on other sites

Hey guys, i changed the plugs today and it made no difference at all. My AFM is only like 6 months old and has been used stuff all so i dont think that it is that. Is it possible to be the o2 sensor?

Anyone else got any ideas?

Thanks, Mike

02 Sensors only "Trim" your fuel mixture.

I would be inclinded to be looking at the Ignition system (black smoke indicating unburnt/rich fuel). But thats not to say its not an injector problem. Biggest thing is to test things when you can replicate the problem - hence the use of dyno's for diagnosis. Its one of those things - to the untrained eye you could spend a long time looking for it.

Cheers

Sumo

Edited by Sumo
Link to comment
https://www.sau.com.au/forums/topic/136683-r33-missing/#findComment-2543858
Share on other sites

it started missing after i completed a whole heap of work. ive had stuffed coil packs before and i know the symptoms of them.

car should be going on the dyno sometime this week but i kinda wanted to get rid of the miss before the dyno.

Thanks, Mike

Link to comment
https://www.sau.com.au/forums/topic/136683-r33-missing/#findComment-2544105
Share on other sites

hey guys do u think my problem could be my TPS?

No!!! 99.999999% of the time a missfire will be due to a bad plug (wrong heat range, incorect gap, cracked insulator) or a bad coil (cracked coil boots, foreign particles around plugs/boots and or excessive oil or the coil itself). Also overly retard ignition can casue missfires along with about a thousand other things - check the basics first always!!!!

Can somebody please do a missfire check list and wirte it into a sticky - I swear we see this post every week.

Link to comment
https://www.sau.com.au/forums/topic/136683-r33-missing/#findComment-2546595
Share on other sites

I have similar problem my car falls into a very big hole at full throttle over 4000rpm. I did also have a misfire but a dodgey coil pack was the cause of that. i have exchanged igniter module with a new one still no luck my next step is AFM. if no luck im getting an aftermarket ecu and split fire coils and hope like hell it fixes itself

Link to comment
https://www.sau.com.au/forums/topic/136683-r33-missing/#findComment-2550723
Share on other sites

hey guys 99% sure its not my plugs or coil packs. It misses at any RPM. Ive changed my plugs and gapped them at 26 thou.

Also my injectors are only a couple of months old and were working a few weeks ago, so they should be fine.

I will check the CAS and timing though.

Thanks, Mike

Link to comment
https://www.sau.com.au/forums/topic/136683-r33-missing/#findComment-2554735
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 2 spots that my exhaust guy joined the 2 pipes together  Made a big difference. I'm now able to live with it. I can make it louder if I want by removing the HKS caps.
    • Hi all, considering clutch upgrade to support 1130 engine hp from 1650cc injectors on e50 at 85% duty cycle (1650 x (11.85/14.7) x 85%). Narrows down to these three as they can be converted to use gm 26 spline input shaft if I ever want to use transmission with that input shaft (orc1000f and r3c easy/cheap just change center hub; tr2cd pricier must change clutch discs). Pricing orc1000f similar to tr2cd, r3c about usd 200 pricier. Orc1000f triple plate 200mm. Tr2cd twin plate 215mm. R3c triple plate 215mm. Claimed max torque : orc 1000f 723 lbs ft; tr2cd 800 lbs ft; r3c 1100 lbs ft. Why orc1000f triple plate but claims lower max torque vs tr2cd twins? Is orc1000f underrated? Any info maxing out these clutches? Info on street/traffic driveability/pedal feel? Thank you for any info on them.
    • Some troubleshooting, connect up a timing light/gun with a proper ignition lead on coil 1. Hold the revs at 4~4500rpm and see if your timing is all over the shop, scattering off its tits. If so, there's a high chance your CAS is fked. But I read you have a Link ECU ready to go in, why not just skip all this and put that in - will make troubleshooting so much easier.  
    • Misfires when the car is fully warm are generally attributed to the coils (and/or the igniter, on cars with a separate igniter). They can stop working properly when they get hot for a number of reasons. Either electric/electronic, or from thermal expansion opening up gaps and allowing HV leakage. Seeing as you have replaced the coils, that could/should rule them out. But I wouldn't always assume so. Were the coils genuine? Or is there a chance you have bought some counterfeit Chinesium shit? Then we're back onto loom connections. They can fail when warm/hot for the same reasons. Inspections, cleaning of contact surfaces, ensuring that terminals are fully inserted, etc etc, are all justified. The same (heat effects) holds true for the other electrics and their connectors. AFM & CAS, primarily. If you try that Chinesium AFM, drive it around on low load until it is properly hot, but do'nt give it more load than you have to, except when you need to see if it will still miss. I'm dead serious about the untrustworthiness of the calibration of those copy AFMs. Injectors are unlikely to get hot unless the fuel is coming back around hot. You could try squirting them with compressed air or freeze spray to cool them back down to see if they are maybe the cause.
    • Alright, all the plugs looks good. Noticed that it starts to get bad when the car is up to temp, that's when things starts to misfire hard. next to do is Injector cleaning and such. Got in touch with a shop to do work on the injectors next Monday also help on diagnosis.
×
×
  • Create New...