Jump to content
SAU Community

Recommended Posts

1957.jpg

Front.jpg

25GTt.jpg

Hey, this was my old R34 25GT, first pic is a couple of days after I bought it, the second is after it had the bolt-on turbo fitted, third picture speaks for itself :no: I unfortunately don't have too many pictures left of it as they were lost on my old HDD.

It was a great car, would probably still have it today if it hadn't had been stolen and written off. The only thing I found wrong was I got bored with the performance after a bit, that's what made me do the turbo upgrade. Happens with all cars though, my GTT has had a fair few mods since getting it as well.

I liked the fact the 25GT didn't have HICAS!!!

Link to comment
https://www.sau.com.au/forums/topic/136788-na-r34-owners/#findComment-2549407
Share on other sites

OK this is getting silly, we know you're new, and that you're keen on finding the right car for you etc. But please do a search before you post up some of these threads. HICAS has been covered to death on this forum... installation, explanation, removal and bypass.

Link to comment
https://www.sau.com.au/forums/topic/136788-na-r34-owners/#findComment-2550424
Share on other sites

  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...