Jump to content
SAU Community

Recommended Posts

Hey Guy's,

i have a R32 GTST, but i am unsure on what year it actualy is, guy who sold it said 91, rego says 90 and insurance says 93.

I read while back you could tell my the plaque on the firewall depending on what letter was on the end of the sequence.

Does anyone know how i can identify the year?

Cheers

Cameron

Link to comment
https://www.sau.com.au/forums/topic/137264-how-to-tell-the-difference/
Share on other sites

Well turns out the car is a 93 model also a type M according to FAST, i downloaded it last night.

The date on the blue plate on the firewall say 1998 and the compliance plate doesnt have a date on it :S

Edited by murrayis
Well turns out the car is a 93 model also a type M according to FAST, i downloaded it last night.

The date on the blue plate on the firewall say 1998 and the compliance plate doesnt have a date on it :S

Hahaha.. the 1998 on the blue plate refers to the displacement of the engine :P

lol yea thats what i figured the 1998 was lol, Well put it this way my insurance jsut went up $600 for telling them it was a 93 model, but then again i also told them about the respray, genuine ket, suspension and bigger turbo as well, my bad

lol yea thats what i figured the 1998 was lol, Well put it this way my insurance jsut went up $600 for telling them it was a 93 model, but then again i also told them about the respray, genuine ket, suspension and bigger turbo as well, my bad

When I got my insurance (3rd party fire/theft) I told them bout exhaust etc, which they said doesn't make much of a difference. They said the fact that its 93 increases the premium...cause i had got a quote b4 i bought the car, i used a 1991 r32 gts-t with basic mods just to get an idea and it was a fair bit cheaper than my actual quote for the real car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
×
×
  • Create New...