Jump to content
SAU Community

Recommended Posts

Hey do anyof you guys know much about the ventilated disc brakes?

I see in the General section there is a ventilated disc brake group buy.

Will this be actually better for stopping or does it just mean that on hot days because it is ventilated it can stop as well as it foes at the moment but all the time.

I am just worried that in winter i might crash and ABS might not save my ass like it did once already last year... i want better stopping through winter... would it be a good idea for me to purchase these ventilated disc brakes?

Also on the pic that they have it shows a new brake clamp aswell... does that normally come in a package with the ventilated discs?

Link Below:

http://www.dba.com.au/5000series/5030.asp

Link to comment
https://www.sau.com.au/forums/topic/13727-ventilated-disc-brakes/
Share on other sites

Are you referring to cross drilled rotors??? Or the way they distribute the heat between the inside of the rotor???

Edit: Ok to cover my knowledge of brakes ( I don't know what will help you that you don't already know though... )

Cross Drilled Brakes are very good for braking in single stop scenarios. They pull you up the quickest but you cant repeatably heavy brake on them or they have a tendancy to crack the rotor.

Slotted: These I believe are the best choice for modded street cars ... They give good stooping power and can take repeated heavy braking much much better than cross drills.

As for the centre of the rotor the new Kangaroo Paw technology apparantly distributes the heat build up much more effeciantly than the previous design and if availabe ( Not all rotors have been changed over yet ) are the better option.

Unless you buy some form of package deal I thought you just purchased the rotors seperately to any calipers and such???

Feel free to now correct and ridicule me :)

Dan,

Ventialated disk brakes allow primarily for the removal of heat, via transfer from the metal to the air. This is different to slotted or cross-drilled brakes. If your after a decent brake upgrade then either get some R33 GTR disks, or purchase something from DBA.

See'ya:burnout:

Yeah if you are thinking new rotors I would look at DBA for sure... Ask DBASteve which is best for your car....

I have spoken to him recently and the DBA 963 seemed to be the best option. Theses are slotted rotors with the Kangaroo Paw technology.... The only problem is they are only just completing the machining of the disks and such so they are difficult to get.

They will be my future disks anyways... :)

Would these be a good buy though? Do you think this would increase my stopping power?

I think about $187 for each one, i thought that might be a good deal but don't want them if they won't better my stopping, there won't be too much heat being generated as i don't really do much track work...

Hmmm I guess it depends on your driving style.... I know I could use the better rotors as even on the SAU cruises I must build up huge amounts of heat from my "Spirited driving"

Do you work your car hard often or is it more of a cruizen mobile??? :)

Originally posted by MrGTST

Hmmm I guess it depends on your driving style.... I know I could use the better rotors as even on the SAU cruises I must build up huge amounts of heat from my "Spirited driving"

Do you work your car hard often or is it more of a cruizen mobile??? :)

Well it's more of a cruisen mobile but last winter whilst cruisen quite a few times when traffic were ever so polite so stop spartically in front of me i though.... hmmm maybe my stopping could be upgraded for next winter... now with more than 100 Killowatts i do feel that i should look at this!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
    • Yeah, I guess its pretty easy to get to if this doesn't work. Just wait till next oil change and pull it out. I am going to have to do the oil pan gasket soon and thought I'd just replace it while I was there.  Thanks
    • All that matters is you're safe and you were able to type that post. Hopefully heaps of parts you can recover for the next shell.  
×
×
  • Create New...