Jump to content
SAU Community

Recommended Posts

I have started the front end conversion finally. Once complete I will do a "How to do step by step"

Process so far

Strip standard front and side skirts

Remove radiator, AC condensor, and all other parts fitted to radiator support

Remove radiator support

Fit fibreglass guards

Make custom bonnet hinge spacers

Mount bonnet hinges and bonnet and align bonnet and guards gaps

Fit front bar reo and headlights and align and fit front bar cover

Reshape inner guards/skirt behind radiator panel to suit r34 radiator support angle behind headlights

This is where I am up to. Need approx 1-2 more hours work fitting radiator support and one last trail fitment of the whole front. Once that is gone and perfect the radiator support panel can be welded in.

Then it will be just a respray of the full front and front doors, and put it all back together

More details and photo's to come, just need more time :laugh:

post-14923-1171451432.jpg

post-14923-1171451472.jpg

post-14923-1171451532.jpg

post-14923-1171451626.jpg

post-14923-1171451727.jpg

post-14923-1182757964_thumb.jpg

post-14923-1182758004_thumb.jpg

post-14923-1182758037_thumb.jpg

post-14923-1182758082_thumb.jpg

post-14923-1182758116_thumb.jpg

post-14923-1182758143_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/137313-r34-front-end-conversion/
Share on other sites

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

silly question time - why the fibro guards? are they any different to the OEM steelies?

Looks good BTW

oh and ummm... theyre not... fibro....

However, should you choose to use fibro guards, please use a water-based paint when you get to that point - it's better for you AND the environment! :(

Hey DS; looking hot! Good to see all our goodies have played their part in your build!

Can't wait to see the final result!

Unfortunitly R34 GTT bonnet hinges are different to GTR and the R34 GTT bonnet catch is the same as the Stagea, so I had to buy genuine new GTR hinges and GTR bonnet catch

Still have not fitted the R34 brakes yet, but will do soon.

Where did u get those side skirts from???

They came with the car from JP

There genuine Dolphin as is the rear bar. front bar is M's Factory

Motovation Imports down the Gold Coast has the moulds for the dolphin kit

Grille sold to EAG4IT

He's got an S1 :P what would he need it for?

Front bar still availiable, needs minor repair $300

My 40th coming up this weekend - I'll ask my good wife, she's feeling pleasant towards me atm.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...