Jump to content
SAU Community

Recommended Posts

  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

Without receiving responses from all the Executive Committee members, and in the interest of actually having this event and not cancelling it, I have made an executive decision.

Sunday 4/5/03 5pm

The Parkway Hotel

5 Frenchs Forest Road East

Frenchs Forest

For those of you who know the area this is the place that has the Farmers' Market on Sunday mornings.

The meeting will be held in the Beer Garden (covered)and will go for about 45 minutes I'm guessing. Those that wish to stay on for a bite the Bistro opens at 6.30.

If someone wants to organise a cruise prior please do. :mad:

See attachment for map, X marks the spot. You can't enter from Warringah Rd but it's very easy to find. heh it's just along from Skyline Place. :)

Good thinking Carlo -

Dino, I like the way you think - Pub, Beer, is good !

Whist on the topic of the AGM , see here : http://www.skylinesaustralia.com/forums/sh...&threadid=15027

Can we get an idea of numbers? I told The Parkway I'd let them know approx. how many are staying for a bite.

In addition to the Exec Comm. the following are those I assume are attending:

Majanal

B-Man

Carlo

Doctor

SW20-GT

Blitz

akira

JiMbo

MrGotRice

Sliver_Arrowz

ndr +Melinda

anyone else? bigvis? TWS? Merli? :)

I'll be coming from the mountain silver... would be happy to get lost with you! where shal we meet? Call me 0414 940 938

And I'm 90% on dinner/bite to eat... just gotta check with the other (better) half.

did you guys see the attached map? It's pretty easy, come up Warringah rd cross over the Roseville bridge, continue on for a couple of ks, turn left just before the KFC/Taco bell and left again, 500m on the left.

Silver... I have a route planned... but I'll be leaving from homebush as I'll be there for some garden show I believe that Jody has insisted on. If you want to meet (and anyone else) me at Hombush at say 4pm we can cruise over together.

Give me a call on 0414 940 938 if your interested.

Yeah remember fellas that Sydney auto Salon is on, 6c will be full (most probably), as will the other parks I assume...but theres plebnty of room around there...I will come and meet you guys there at 4pm (hopefully-ill be in da city) and cruz home (frenchs forest) with you guys.




  • Similar Content

  • Latest Posts

    • Well, yes, every CU on the bus is available via the Consult port, but whether the scanner you are using is capable of talking to the TCU, the ABS/TCS modules, etc etc, is what is at question here. Many of them are only for engine codes. So, if you have one of those, you won't know if the ABS is having a bitch.
    • That's now. R chassis Skylines come from a time when the tolerance in the ADRs was a bit more....slack. My car, on 235/35-17, which is damn near the exact same size as the original 205/55-16, is pretty much bang on correct indicated speed across the whole legal range. That's demonstrated with constant speed run over 5km, and GPS speed. It's just the luck of the draw. My particular speedo head has to be the thing that is "calibrated" that way, because everything else (the diff ratio, the gearbox and the speedo drive**) are all same same as most other Skylines. **OK, so the speedo drive is a Navara unit to drive the R32's cable, not the electronic unit than an R33/4 would normally have with teh same gear on it. Otherwise, I applaud your OCD tendencies, and I would do the same if I needed to.
    • Not too sure, I believe the Nissan consult port does everything? Also just filled up the reservoir to full and the light is still on. The float seems to move up and down fine.
    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph on 255/40 17, so again conservative Google says manufacturers need to set the speedo from 4 to 10% slower than actual road speed.....for safety.....and compliance  After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
×
×
  • Create New...