Jump to content
SAU Community

Defected And Fined

ranicx

By ranicx,
in New South Wales

 Share

Recommended Posts

ranicx Veteran

ranicx

Posted
Posted

ok.. well, this is more a case of wrong place, wrong time, but anyway.

coming back from work in north ryde, usaly go down via pymble and avoid epping road (too busy). but this time i went down epping road way, and unknown to me, i was in a T3 lane, and i was the only one in the car.

i just so happens that alot of cops where parked in a side road and one of them steped out and pulled me over.

i figure, yeh, just another RBT again, and he tells me ive goten pulled over for driving in a T3 lane with only me in the car.. i told him i never come this way home and usaly go via pymble, and i honestly did not know that it was T3 lane, but he ignored that and wrote me up for a $179 fine.

next was the car inspection, as per usal, looking for another reason to fry my ass and try and get me off the road.

he checks the car and so on, its all good from out side. pops the bonnet, and seems to be looking quite intently at the air box around the pod.. but he finaly says that it is ok as it is enclosed..

has a look at the FMIC for a little while and says its all ok, and tells me to close the bonnet. but just as i go to do that another older police man yells out, wait wait and comes walking over, quite grumpy and very angry at me for some reason. he looks at the front mount from the front, then looks at the pipes and says "failed". the way he said it seems like he was almost happy that he had got me for something.

the reason why he defected me was because the pipe for the front mount goes over the fan and then out the side of the wheel guard, there had to be a hole cut for the pipe. it did not even touch the chassie rail at all, so as far as i knew, it was ok, but he defected me for it, saying that it changes part of the crumple zone and is not manufatured. he also went on to say that even if i had a small gromet hole there that wasnt stock, it was a defect.

now i think that this is rather slack, as this has been done to just about every skyline which has a FMIC and ive had many cops look under the hood and be ok with that and not say that its a defect.

what do you guys think?

post-22516-1160667438.jpg

post-22516-1160667456.jpg

post-22516-1160667488.jpg

post-22516-1160667512.jpg

Link to comment
https://www.sau.com.au/forums/topic/138472-defected-and-fined/
Share on other sites
ranicx Veteran

ranicx

Posted
  • Author
Posted

forgot to mention.. the reason why i am so peeved about this is that now i dont have the money to get my car regoed in a bit over a week (runs out then) . it will be a month till i can get rego :( and start to drive my car again

hanyou Grand Master

hanyou

Posted
Posted

sorry to hear buddy. i usually never had a prob wid my fmic & piping in my 33 gtst before. but hey some cops are jus power trippers. in a cop car theres always 1 cop thats got a conscience and 1 cop that hasnt had sex all his life except maybe with his sister so dont worry bout it to much mate. if its jus a pink slip jus brush it off.. at least you didnt get EPA'd for it (i hope you didnt)

ranicx Veteran

ranicx

Posted
  • Author
Posted

nar no epa.. got to get the defect cleared up, nazi cop said i had to take the FMIC off and weld up the whole.. then get a blue slip and so on..

blue slip is full car inspection aye? could they fail me for the exhaust pod (its enclosed) boost controler, and rims?

Abo Bob Grand Master

Abo Bob

Posted
Posted

That sux man. I got pulled over last night. They were very interested in my semislicks and I had two of them questioning me about various things in the car. Just as one of them gestured to the bonnet and I could tell he was waiting for the other one to finish what he was saying I went on the offensive. I started lecturing them on tyres, how the different compounds and tread patterns worked, how cars with stock power can get sub 1:50 around Eastern Creek with great tyres and suspension mods. They ended up basically shooing me away while I was still talking at them out the window.

satanic Grand Master

satanic

Posted
Posted

Nice one Bob :)

Ethan that sucks; they must be really really trying to get you if they defected you for a FMIC hole. Sorry to hear...

If you are having troubles with the Blue Slip; it's a piece of cake - shoot me a PM :D As Aarlon said; Blues are easy to get - cops just don't realize.

JAS-25T Grand Master

JAS-25T

Posted
Posted

I dont know how you guys grab the attention of the cops. Touch wood, but I have never been pulled over for more than a RBT in 3 yrs of owning the car. Although I was once followed home, to which I thanked the cops for being so concerned with me getting home safely.

Either way, hard luck, get it cleared and do mods to your car the right way - either get an engineers cert. for the mods or do them to the rta guidelines, then when/if they pull you over have a copy of the cert. or guideline and tell them to stick it in their cakehole.

Sinful Grand Master

Sinful

Posted
Posted
That sux man. I got pulled over last night. They were very interested in my semislicks and I had two of them questioning me about various things in the car. Just as one of them gestured to the bonnet and I could tell he was waiting for the other one to finish what he was saying I went on the offensive. I started lecturing them on tyres, how the different compounds and tread patterns worked, how cars with stock power can get sub 1:50 around Eastern Creek with great tyres and suspension mods. They ended up basically shooing me away while I was still talking at them out the window.

i like your style talk the police into bordom and then they let you go i love it .

To the guy who got jacked sorry mate it sucks we had heaps like this in adelaide and all you can do is take it we have even tried to get a enginer to go through and re write the defect book and only was successful with a handful of mods allowed. EG pod filter secure etc .' i think that was one'.

Anyway good luck let us know how you do :(

((andrew))

siksII Grand Master

siksII

Posted
Posted

the defect means that they think there is something wrong, it doesnt mean that there actually is, thats why you have to go get it inspected etc. so if the mechanic who inspects it thinks it is ok it will get passed.

dont take what the cop said as fact, they are not engineers or mechanics, and you get a different story from every one u speak to which shows they dont even know the law regarding this issue properly.

go to a mechanic, have a chat to him and see what he says, you may be pleasantly surprised, if not, use the contacts which others have PMd you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      R32 Gtst - Track Car

      By MBS206 · Posted

      Biggest thing is you're okay!   It sounds like between the accident, and the drive home, it was a pretty torturous trip again! On the bright side, you took the opportunity to enjoy the event more from the perspective of a spectator, than as an entrant!   Sad to see so much damage to the car. It really has taken a HUGE hit in the front end. If/when you choose to repair, hopefully the rails are straight (At least from shock tower backwards). Hopefully the extra cage coming through there has save most of the chassis rails, and HOPEFULLY saved the motor too. Best of luck when you eventually get motivated to start pulling it down to check it all out
    • MBS206
      Slight brake pedal stutter after new pads

      By MBS206 · Posted

      Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • PranK
      Slight brake pedal stutter after new pads

      By PranK · Posted

      The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • MBS206
      Slight brake pedal stutter after new pads

      By MBS206 · Posted

      What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • bcozican
      R32 Gtst - Track Car

      By bcozican · Posted

      Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
×
×
  • Create New...