Jump to content
SAU Community

Recommended Posts

If anyone is interested in taking pics of their car in a proper photo booth, i have acces to the one where i work.. there's also a car wash facility there so you can shine yr car up prior to shooting it.

There is, of course, a small fee for it's use and you must supply yr own camera.

PM me if yr interested

kthnx.

Link to comment
https://www.sau.com.au/forums/topic/138752-photo-booth/
Share on other sites

You also need to bring your own lighting to get it to look like the pro's do.

Studio's are great. Freakin awesome if you know what you're doing and have all the equipment. I'll gladly do a studio session with anyone's car. But it'll cost a lot of money to do.

Reflections play a key part. Even more so in a studio environment, because you don't want the lights showing up in the paint, but conversely you want the light to show off the lines of the car by reflecting. So things get a bit difficult. Lots of time is involved too.

Sure you can just rock up and start shooting with an onboard flash, but you'll get better results in an industrial park in the fading afternoon sunlight IMO.

This is what a studio setup looks like:

1.jpg

2.jpg

5.jpg

See those lights? $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

Link to comment
https://www.sau.com.au/forums/topic/138752-photo-booth/#findComment-2584905
Share on other sites

Yeah, but that makes the post work take so much longer. I hate working with warm lights.

lol

it was a joke

but i guess if you used a grey card to set the WB it wouldn't take so long...

but yeah, i know what you mean about working with warm lights

the ones i use at work make it so much easier to get accurate colours

img6362tw0.jpg

Link to comment
https://www.sau.com.au/forums/topic/138752-photo-booth/#findComment-2588981
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...