Adjusting Tein Nr Spring/shock Combo

[Sol32]

Hi guys

Fitted new springs to this setup a couple weeks back. The guys at the workshop had them out, and couldnt for the life of them figure out how to adjust the height. (Im sure its adjustable, because of the 4-height setting rings you can see in the pic (It can go down another 10mm) Anyone have a similar unit and know how to adjust it? From what ive been told, its not the traditional C-spanner approach. Any help appreciated.

Cheers

[BHDave]

You have to remove the spring and tap the seat up the shock body to expose the circlip. Then just move the circlip down and reset the seat.

You may be able to get away with just compressing the spring on the car without removing it completely but i expect it will be the harder option.

[Sol32]

Thanks heaps!

You have to remove the spring and tap the seat up the shock body to expose the circlip. Then just move the circlip down and reset the seat.

You may be able to get away with just compressing the spring on the car without removing it completely but i expect it will be the harder option.