Jump to content
SAU Community

Recommended Posts

Hi Guys

just putting up this second group buy for the HID kits

Now that i have the exact kit installed i can let you know more about them

i have been told from the supplier that there are a few more kits that can be sold

Supplier: Slick Auto

Gb end date: 31/10/06

they are

3 x H1 6000k

4 x H4 6000k

1 x H3 6000k

the price is the same as b4

$220 delivered

if you are around the sydney area you can see how the kit is as i have it installed in my car

it is a plug and play kit comes with the relays

and you dont have to cut any wires like people say to put in a resistor

also has the samsung IC

good quality kit both water and dust proof

let me know who wants in

here are the pics of the kit

HID1.jpg

HID-BOX1.jpg

Link to comment
https://www.sau.com.au/forums/topic/139336-gb-2-hid-kits/
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Hi Mate,

Just a few questions

Can you confirm that H1 will fit on an R34?

And is the Light white or blue in colour when you turn the head lights on?

If it fits an R34 and the light is white, then you can put me down for a set of H1.

Cheers

Woldo

Link to comment
https://www.sau.com.au/forums/topic/139336-gb-2-hid-kits/#findComment-2596704
Share on other sites

Hi Mate,

Just a few questions

Can you confirm that H1 will fit on an R34?

And is the Light white or blue in colour when you turn the head lights on?

If it fits an R34 and the light is white, then you can put me down for a set of H1.

Cheers

Woldo

if the standard bulb of the r34 is H1 then it will fit

the color of the light is white

you have to find out which bulb you got take one out and take to a auto shop and they will tell you

Link to comment
https://www.sau.com.au/forums/topic/139336-gb-2-hid-kits/#findComment-2596774
Share on other sites

if the standard bulb of the r34 is H1 then it will fit

the color of the light is white

you have to find out which bulb you got take one out and take to a auto shop and they will tell you

Thanx mate

Will get it checked out and let you know.

Can you put one aside for me for now tho?

Cheers

Woldo

Link to comment
https://www.sau.com.au/forums/topic/139336-gb-2-hid-kits/#findComment-2596851
Share on other sites

where in syd are ya mate?

any 8000k available?

im around the liverpool fairfield area

6000k only man

they are the most common that is why the importer got them in i was told

also you get defected with the 8000k because it is too blue

Link to comment
https://www.sau.com.au/forums/topic/139336-gb-2-hid-kits/#findComment-2608226
Share on other sites

So it's not hard to install these lights in my R34 GTT? Put me down for a set if so.

all i did on my car was take the H1 standard bulb out put in the H1 HID bulb and then plug in all the connections and they worked

if you are from sydney i can show you when you pick up item

thanks

Link to comment
https://www.sau.com.au/forums/topic/139336-gb-2-hid-kits/#findComment-2609212
Share on other sites

do you have pics of your lights nismos15? preferably pointing at a flat surface?

i've got a kit in my R34, and the light is SHITHOUSE. Don't know if it's like that without having the OEM parts, or i need a new kit

Link to comment
https://www.sau.com.au/forums/topic/139336-gb-2-hid-kits/#findComment-2612371
Share on other sites

whats the go with low and hi beam, which one do you replace?

i'm guessing the Hid is only for hi beam. so what do you do to match the low beam, parkers and fog lights?

just let me know what the go is, i've got the money waiting.

cheers

Link to comment
https://www.sau.com.au/forums/topic/139336-gb-2-hid-kits/#findComment-2614179
Share on other sites

these Xenon kits aren't really for hi beam, it's for lo beam.

Aftermarket HID kits aren't designed for hi-beam, because they don't really come on instantly, and take a little while for the light/colour to stabilise.

only the more luxury marques are releasing bi-xenon recently, last couple years. And i think even then, it involves having a bit of a shield over the hi-beam light

yeah, you can put some really white/blue halogen globes in if you wanted

Link to comment
https://www.sau.com.au/forums/topic/139336-gb-2-hid-kits/#findComment-2614191
Share on other sites

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
    • It sounds like you want what the Toyota Landcruisers have for their roof racks. Wanna know what you end up with? Rust holes in the roof, and water everywhere...
    • Discovered today that if I select reverse first and take my foot off the brake, then select drive, the drive indicator light works and so does the tiptronic gear indicator. 
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Does anyone here have any ideas?   Cheers guys
×
×
  • Create New...