Jump to content
SAU Community

Recommended Posts

Hi Guys

just putting up this second group buy for the HID kits

Now that i have the exact kit installed i can let you know more about them

i have been told from the supplier that there are a few more kits that can be sold

Supplier: Slick Auto

Gb end date: 31/10/06

they are

3 x H1 6000k

4 x H4 6000k

1 x H3 6000k

the price is the same as b4

$220 delivered

if you are around the sydney area you can see how the kit is as i have it installed in my car

it is a plug and play kit comes with the relays

and you dont have to cut any wires like people say to put in a resistor

also has the samsung IC

good quality kit both water and dust proof

let me know who wants in

here are the pics of the kit

HID1.jpg

HID-BOX1.jpg

Link to comment
https://www.sau.com.au/forums/topic/139336-gb-2-hid-kits/
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Hi Mate,

Just a few questions

Can you confirm that H1 will fit on an R34?

And is the Light white or blue in colour when you turn the head lights on?

If it fits an R34 and the light is white, then you can put me down for a set of H1.

Cheers

Woldo

Link to comment
https://www.sau.com.au/forums/topic/139336-gb-2-hid-kits/#findComment-2596704
Share on other sites

Hi Mate,

Just a few questions

Can you confirm that H1 will fit on an R34?

And is the Light white or blue in colour when you turn the head lights on?

If it fits an R34 and the light is white, then you can put me down for a set of H1.

Cheers

Woldo

if the standard bulb of the r34 is H1 then it will fit

the color of the light is white

you have to find out which bulb you got take one out and take to a auto shop and they will tell you

Link to comment
https://www.sau.com.au/forums/topic/139336-gb-2-hid-kits/#findComment-2596774
Share on other sites

if the standard bulb of the r34 is H1 then it will fit

the color of the light is white

you have to find out which bulb you got take one out and take to a auto shop and they will tell you

Thanx mate

Will get it checked out and let you know.

Can you put one aside for me for now tho?

Cheers

Woldo

Link to comment
https://www.sau.com.au/forums/topic/139336-gb-2-hid-kits/#findComment-2596851
Share on other sites

where in syd are ya mate?

any 8000k available?

im around the liverpool fairfield area

6000k only man

they are the most common that is why the importer got them in i was told

also you get defected with the 8000k because it is too blue

Link to comment
https://www.sau.com.au/forums/topic/139336-gb-2-hid-kits/#findComment-2608226
Share on other sites

So it's not hard to install these lights in my R34 GTT? Put me down for a set if so.

all i did on my car was take the H1 standard bulb out put in the H1 HID bulb and then plug in all the connections and they worked

if you are from sydney i can show you when you pick up item

thanks

Link to comment
https://www.sau.com.au/forums/topic/139336-gb-2-hid-kits/#findComment-2609212
Share on other sites

do you have pics of your lights nismos15? preferably pointing at a flat surface?

i've got a kit in my R34, and the light is SHITHOUSE. Don't know if it's like that without having the OEM parts, or i need a new kit

Link to comment
https://www.sau.com.au/forums/topic/139336-gb-2-hid-kits/#findComment-2612371
Share on other sites

whats the go with low and hi beam, which one do you replace?

i'm guessing the Hid is only for hi beam. so what do you do to match the low beam, parkers and fog lights?

just let me know what the go is, i've got the money waiting.

cheers

Link to comment
https://www.sau.com.au/forums/topic/139336-gb-2-hid-kits/#findComment-2614179
Share on other sites

these Xenon kits aren't really for hi beam, it's for lo beam.

Aftermarket HID kits aren't designed for hi-beam, because they don't really come on instantly, and take a little while for the light/colour to stabilise.

only the more luxury marques are releasing bi-xenon recently, last couple years. And i think even then, it involves having a bit of a shield over the hi-beam light

yeah, you can put some really white/blue halogen globes in if you wanted

Link to comment
https://www.sau.com.au/forums/topic/139336-gb-2-hid-kits/#findComment-2614191
Share on other sites

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...