Jump to content
SAU Community

Recommended Posts

I believe there were some they didn't come with hicas as there is a powersteer pump available without hicas.

Most likely the n/a base model.

I'm probably wrong though as I don't know for sure.. Just something I vaguely remember.

I found heaps of R33's that didn't have HICAS, & they were factory original.

When I bought mine it was the only one I'd found with the system on it & these were only just complied cars we're talking about here too. The setup is actually a bit different & lacks the adjustments for toe that the HICAS type rear end has.

Link to comment
https://www.sau.com.au/forums/topic/139443-defected/page/5/#findComment-2707798
Share on other sites

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

- re-instate abs control function. (doesent have abs.. IDIOT) supply report stating operation ok

Hmm, I thought this one interesting, but I suppose it part and parcel with inspector inconsistencies.

When my car went through, I had the ABS fault light ON (I've turned it off due to common problems with it) in orange on the dash and no comment was made about it. ABS shouldn't matter if you can pass the breaking test.

Best of luck

Link to comment
https://www.sau.com.au/forums/topic/139443-defected/page/5/#findComment-2708498
Share on other sites

Hmm, I thought this one interesting, but I suppose it part and parcel with inspector inconsistencies.

When my car went through, I had the ABS fault light ON (I've turned it off due to common problems with it) in orange on the dash and no comment was made about it. ABS shouldn't matter if you can pass the breaking test.

Best of luck

i have passed the breaking test.

thanks helso for the offer, when i can find the hicas i may take you up on that. :D

dam, they system is setup to focus more on the technicality than the practicality!

Link to comment
https://www.sau.com.au/forums/topic/139443-defected/page/5/#findComment-2709391
Share on other sites

Yeah bud, if there's a lock bar in place, we could do a swap. The only problem I forsee is that it requires a wheel alignment to be done after the swap, so if you wanted the bar back, you'd have to get two alignments done. For a time frame, I'd go with Nozila's estimate, but, now that I've done one, I think I could shave a half an hour to an hour off of it

Edited by heslo
Link to comment
https://www.sau.com.au/forums/topic/139443-defected/page/5/#findComment-2710729
Share on other sites

thats true, once you 'crack' the bolts so to speak, its alot easier to unbolt and re-bolt. i didnt have that luxury as i stated, i was first time the bolts were unbolted. but since you have (i presume) a lock bar then your bolts would be easy as to undo. pain in the back side none the less. wheel alignment is highly advised.

Link to comment
https://www.sau.com.au/forums/topic/139443-defected/page/5/#findComment-2710855
Share on other sites

maybe it would be easier to just borrow one thats already off, wanna lend me yours nozila?

i have to replace my battery in my boot with a dry cell batters i have been quoted $480 for one.

wat the hell this is bullshit, F@#K this government. seriously!

Edited by DriftR_33
Link to comment
https://www.sau.com.au/forums/topic/139443-defected/page/5/#findComment-2711010
Share on other sites

Yeah, it's screwed up but what can we do? If you don't want to swap with mine and get a replacement that you can use, I'm still more than willing to lend a hand.

thanks mate for willing to help me... :)

my mate found me a r33 hicas today and have installed it. cost me nothing HAHA :D:)

Link to comment
https://www.sau.com.au/forums/topic/139443-defected/page/5/#findComment-2722137
Share on other sites

. We need cops that stop crime instead of discriminantely fleecing certain members of the public & making them out to be the crims instead.

true ^^

1 of the reasons why i sold my old 33gtr years ago...they pulled me over and gave me a fine for changing lane @ a roundabout (glenelg) near the revolving restaurant. Another time they pulled me over to search for my 2 bov, but being stupid noobs, they couldnt find them, bov are under the engine bay in GTRs.

just anything they could find, they'll make that extra effort to fine/defect u

while the real bad guys are still out there doing the real damage

so bl jase, just a bad day out @ kfc :D

Edited by andz69
Link to comment
https://www.sau.com.au/forums/topic/139443-defected/page/5/#findComment-2722158
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...