Jump to content
SAU Community

Recommended Posts

I've done a search and found a lot of results for flat spots but most of them related to RB25s.

At about 5000rpm my car seems to hit a huge flat spot, seems to get stuck there and doesn't want to rev any more. Mods are FMIC, Blitz panel filter, R33 Turbo, 3" turbo back, splitfire coil packs, remapped chip and 12psi boost. Spark plugs are BCPR6ES 0.8mm gap.

The only things i can come up with is the ecu might be going into a rich and retard mode similar to the RB25 ecu does or the spark plugs might need replacing. They've been in there for around 10,000kms now. Also could i have reached the limit of fuel pump (stock and original as far as i know), afm, injectors or something like that?

Also checked knock sensor plugs and they're fine.

Cold nights it's particularly bad. Once or twice in 1st gear its almost sounded/felt like a rev limiter at 5000rpm.

Link to comment
https://www.sau.com.au/forums/topic/139644-rb20-flat-spot/
Share on other sites

ive never noticed any flat spot in mine... i have fmic, r33 turbo, 3"turbo back zorst at about 10psi... gonna tune it higher cause i got a piggy back and i wanna get gtr injectors... i already got a gtr fuel pump...

ill keep it in mind but...

Link to comment
https://www.sau.com.au/forums/topic/139644-rb20-flat-spot/#findComment-2602854
Share on other sites

Thank you for the most useful answer i have ever received on these forums. You really deserve an award and i'm proud to be part of a forum with members like you! :laugh:

Yes it's an RB20, no the flat spot is not a lack of torque. The flat spot i refer to is something causing the engine to not perform to 100% of its ability at that particular point in the rev range, whether it be due to lack of spark, excess of fuel or something else!

Cold nights it's particularly bad. Once or twice in 1st gear its almost sounded/felt like a rev limiter at 5000rpm.

I didn't know a lack of torque could cause that!

The reason i asked was to get an answer that would help me fix my problem, not a smart ass answer that doesn't get me anywhere!

Edited by Psymon
Link to comment
https://www.sau.com.au/forums/topic/139644-rb20-flat-spot/#findComment-2602961
Share on other sites

Hey

I too have this problem and it is $hitting me to tears... It dosent feel like all the power is getting through at all. Im running front mount (justjap), 3" exhaust, pod, dump/front pipe and stock boost which is around 12psi with these mods.

In testing this against a mates car (sr20 n/a), its embarrasing to say that i am getting cleaned up in my rb20 r32... at least im not the only one in this boat it seems! good luck with finding the problem, if i find a solution i will pass it on.

Link to comment
https://www.sau.com.au/forums/topic/139644-rb20-flat-spot/#findComment-2603332
Share on other sites

Hey Psymon i had the same problem in my 32,but it was lower in the rev range, between 3500 to 4500 it was absolutely gutless. couldn't work out what it was until i bought another turbo, bang problem gone. I put my problem down to a stuffed wastegate actuator. Hopefully its not this in your case but like yogi000 said a diagnostic check hopefully will help you out. Good luck

Link to comment
https://www.sau.com.au/forums/topic/139644-rb20-flat-spot/#findComment-2603668
Share on other sites

Yeah i think it could be a fuel pump as well. I just ran diagnostics and the only code i got was 54 (auto signal) but the auto is long gone so that makes sense. I'll try the plugs because they're due to be changed anyway and if that doesn't work i might get the pump tested.

I think i saw some cheap 040's for sale! :D

Link to comment
https://www.sau.com.au/forums/topic/139644-rb20-flat-spot/#findComment-2604605
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...