Jump to content
SAU Community

Fs: Series 3 R33 Gtr

ookami

By ookami,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

ookami Experienced

ookami

Posted
Posted (edited)

Year : 1997 (series 3, Xenon Headlights etc.)

Colour: Sonic Silver

Condtion Very Good

My car has to go, situations have changed again this time it must go.

Was imported in June this year under sevs since getting it here it has been serviced twice using Motul Oils and the timing belt was replaced at the dirst service with a HKS belt even though it appeared to have new on just recently put on. Car is 100% mechanically stock non V-spec. Car currently has 18" Black Nismo LM GT4 II wheels.

Other non standard features;

Thatchem approved Alarm (not disclosing brand on internet) see - http://www.thatcham.org/

Alpine MP3 head unit

HKS Type 1 turbo timer - only few weeks old.

Genine Nissan GTR Floor Mats

Nismo But plug black gear knob

I'm after $34,000 with standard wheels or $38,000 with the nismo wheels.

Very regretful sale. Number Plates not included.

wheels4.jpg

I will get interior and engine bay photos up as soon as i can.

Edited by ookami
Link to comment
https://www.sau.com.au/forums/topic/139961-fs-series-3-r33-gtr/
Share on other sites
ookami Experienced

ookami

Posted
  • Author
Posted

Selling due to a possible change in financial position and the fact my child will be born in the next coming days. I am semi neg on the prices, you can always try worst i can do is tell you go eat a fat one :P

dwabdeh Enthusiast

dwabdeh

Posted
Posted
Selling due to a possible change in financial position and the fact my child will be born in the next coming days. I am semi neg on the prices, you can always try worst i can do is tell you go eat a fat one :D

semi - meaning not much on the price? :mad:

Thats good to know, meaning I don't need to place an offer because there is no Budging.

well I'll be in Brissie in 2 weeks, I'll see how your tread goes... ;)

ferni Grand Master

ferni

Posted
Posted
well, if you all think that this car is worth what its priced for then why hasnt it been sold yet?

There are many people who are looking for GTRs on the market but are not willing to pay that much

Cheers

They are the same people who will buy a cheap 15,000 R32 GTR, blow the engine the first week then can't afford the rebuild. You get what you pay for.

Blitz Grand Master

Blitz

Posted
Posted
well, if you all think that this car is worth what its priced for then why hasnt it been sold yet?

There are many people who are looking for GTRs on the market but are not willing to pay that much

Cheers

Because 90% of people looking for a GTR dont have a clue what a good one is worth, and can only afford the cheapest, most run down example that they can find.

That is why.

Just because a car is a good price, that doesnt mean its going to sell in 5 mins.

dwabdeh Enthusiast

dwabdeh

Posted
Posted
They are the same people who will buy a cheap 15,000 R32 GTR, blow the engine the first week then can't afford the rebuild. You get what you pay for.

I've owned many skyline's. Pervious one, Yes an R32 GTR, pirce I payed and sold it for I can't say.

it was a mint cheap one, and it lasted the trashing I gave it and still sold it as an excellent condition car.

Like I sayed before Im not criticizing on what they are worth and not looking for a cheap crapping one!

I have seen these cars go for 45k and 14 months down the track sell for 29k (the same car!)

There people who have an idea what to look for, and what to pay for a GTR.

furthmore - these are just the many reason why they havn't sold!

I hope he sell it for the price he wants. :P

I am not the person who just emails a ridicules price. I wait and see :D

ookami Experienced

ookami

Posted
  • Author
Posted

For all the tight asses out there, the car insured at market value which is more than i am asking for it. Also forgot to add it has a thachem approved security system, all black wiring, 3 point imboliser, interior movement sensors blah blah blah to comply with full insurance standards.

GT-R32 Grand Master

GT-R32

Posted
Posted

Beautiful car, and god damn it I want those rims.

Redbook on these for interest's sake:

http://www.redbookasiapacific.com/au/vehic...hp?key=NISS98CW

So yes, it certainly is under market value and looks to be an awesome example.

I want those rims (I know I have said it twice :rolleyes: ).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...