Jump to content
SAU Community

Recommended Posts

Im having problems with my ID3 which is only 8-9 mths old.

Vehicle is an R32 GTR

Basicly it was working fine and holding boost perfectly.

I moved the solonoid pack from the exhaust side of the engine bay and returned the vacum lines to original then fitted the solonoids to the intake side and simply put it into the place of the OEM solonoid. The in and out was correct and it would only make .7 bar regardless of what I did to the controller. Tried the re-set and self learn etc but nothing made any effect. I have checked for broken wires everything is sweet and all the vacum lines are in my oppinion plumbed in correctly.

I removed the ID3 solonoids and re-fitted the OEM unit without any other changes now it makes and holds 1 bar perfectly.

I have opened up the solonoid pack and checked the things with a meter, neither of them are open circuited which would lead me to beleive I have a problem with the control unit.

Have people had issues with solonoids from Blitz??

Have people had issues with the control units??

Im asuming plumbing up the ID3 at the original soloinods location is okay on the GTR as I have seen them fitted here before??

Thanks In advance.

Brad

Link to comment
https://www.sau.com.au/forums/topic/139993-blitz-id3-issues/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...