Jump to content
SAU Community

Recommended Posts

  • Replies 76
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Hey Greg,

Well that’s pretty silly paint lol, I wonder why they would bother putting it on then? anyway, I’ll be getting a set of these, how would i go about getting the paint off?

What are the downsides to not heat wrapping them? just a hotter engine bay or will other things go wrong?

I am still a bit hesitant about heat wrapping mine because I heard that you can do damage too them when they don't cool down quick enough. Have you come across any of these problems?

ohh and what heat wrap did you use?

Thanks mate,

Regards,

Sean'O

i didnt really think heat was such a big issue with headers, obviously the engine bay is a little warmer, and you might get a cool orange glow if you give it enough stick - but since headers deal with exhaust gases and the gases are constantly being expelled i cant see any sort of large significant gain.

although someone can come tell me otherwise, i'd like to know as well.

Hmm, well that all looks very pretty but, it sounds very expensive and in my case a bit unnecessary,

I only have a RB20DE, and its not a dragster lol, so I don't think I will need the heat protection presuming that the extra heat by just having them in there won't damage anything during everyday driving.

However I would like the corrosion protection to make them last a bit longer, wouldn't the caliper paint (as suggested above) be sufficient here?

What we need here is an opinion by somebody who installs exhausts, or someone who has had this particular unit for a while.

I'm still assuming that the level of heat protection etc is dependant upon the style of driving your car goes through, if you just drive to work and back I would guess that ceramic coating is a bit extreme, but if you do track work or something, maybe its worth it.

Again I’m just prating on, we really need some guidance here,

Regards,

Sean'O

The bottom of my intake pipe started to melt from the high temperatures. This could have caused a fire and ultimate destruction of engine. This, and the power gains, is why I recommend to heat wrap them. Having said this there are plenty of people using them un heat wrapped without dramas

The orange paint is just to stop them rusting while they're in the shop etc. so they look good.

You could use a blowtorch to get the paint off, or paint stripper, or just heat wrap over it, won't be the end of the world.

Cheers

Greg

thanks for your input greg, much appreciate it...

guys please check the group buy thread, i have updated the first post accordingly - and will need each one of you to state what it is exactly that you want. then we can finalize prices.

see here:

http://www.skylinesaustralia.com/forums/in...howtopic=140134

i'm getting a 2.5" outlet, gasket, hpc coated with economy delivery and it's totaled to AUD$425 which is an absolute steal!!!

guys, some good news... i've called up and we are pretty much good to go.

- they are able to cut the outlet back to 2.25 to 2.50", since i know most of you would have/looking into a catback system in future.

- hpc coating is AUD$170 per header.

- i've also made mention about the orange paint and they are looking into that, obviously not a worry with HPC coating.

- i've also made arrangements for a variety of shipment, these will go from them straight to your door.

- rb30e extractor is also available (the code is D5) and i have sweet talked them into including that into the arranged price with rb20/25.

shipment options

International Express (1-3 days) AUD$100.00

International Air (3-6 days) AUD$70.00

International Economy ( 10-15 days) AUD$60.00

http://www.skylinesaustralia.com/forums/in...t&p=2659059

another update guys... please check the first post of the group buy thread - make sure everything adds up accordingly and is correct.

confirm with me and i'll provide you with bank details.

cheers

  • 2 weeks later...

Well just got myself one... Can't wait to hear the extractors on my r34... It already sound rippy... imagine with extractors and 2.5' exhaust mmm =]~. Oh also If you guys are to get one or anything from eug. do so he makes things so easy ^_^ and obviously well trusted! Cheers eug again.

Edited by Specrzx
  • 2 weeks later...

you should receive yours well before anybody else buddy, since you have air freight and are not waiting on hpc coating.

check the link in my sig to check the group buy thread for updates.

according to the email i recieved yours was sent out on the 29th of november so give it 3-6 working days... expect them around the end of the coming week, or beginning of the week after. let me know otherwise.

please be patient, this stuff is coming internationally

  • 3 weeks later...
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...