Jump to content
SAU Community

Rb25de, Rb20de & Rb30e (skyline & Cefiro) Extractors/headers Group Buy


Recommended Posts

i'm not quite sure what you are on about Sean.

it's just a standard (if you can say that) high temperature corrosion barrier.

why would you coat the header internally? no one does that as far as i know - nor is there any real beneficial reason to.

hpc coating is generally used as a thermal barrier - so yes it will provide some heat protection similar to that of heat wrap.

changing the outlet should not incur any extra cost, i have asked and here is what i recieved:

Hi Eugene

All good there. I'm sure that the cutting back won't incur any costs. Mark is pretty good with that kind of thing.

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Hey,

Have a look at this web site, this bloke has talked me into not getting the heat wrap,

Particurally the last "IN CLOSING" section where he states

"If you want a true thermal barrier that will reduce thermal loss in the header, reduce under hood temperatures, and make a few horsepower in the process, have your headers coated by one of the many companies available (links to a few are above). Most all of the coating companies offer inside and outside complete coating as standard. DO NOT allow your headers to only be coated on the outside, this is not a complete or quality process"

Just wanted your opinion on this,

Regards,

Sean'O

while i dont claim to be an expert on headers - i think your looking into it way too much. we aren't extracting every last kilowatt here.

the entire reason why i enquired about the hpc coating was due to the heat made by headers as greg pointed out.

by all means if you want you can just purchase the headers themselves and get it hpc at a company you prefer - i'm just merely passing on an offer made available to us.

Hey,

Sorry if that came out wrong, I appreciate it very much that you are organising this group by and i'm no expert either so I appolagise if I asked a little too much.

I didn't mean to come across as critical about every kw, i'm just concerned (as everyone one would be) that this is a fair amount of money we are spending and just want to know what we are getting so there are no supprises later.

Thanks again for going to all this trouble 4 us,

Regards,

Sean'O

that's fine dude - ultimately its your money and you have a right to know what you're paying for.

i have emailed partsco and asked them anyway - so i'll get back to you with whatever they say. as i said - if you want to be sure, then i suggest getting them hpc coated with someone you know. at $170 its dirt cheap, so personally i am not fussed.

Thanks heaps for that,

Yeah true $170 will be hard to pass up regardless of the outcome :)

Thanks mate,

Regards,

Sean'O

Edited by Sean'O
Eug,

I'll go the 2.5" outlet, economy with the gasket.

first post updated...

everyone please double check the first post incase i've missed anything

cheers

:sorcerer:

p.s - come on we need at least another 1 or 2 more, this is an absolute bargin!

macca_r33, whitezuluR32, Sean'O ????

lots of yes, but no follow ups... whats the go?

nick jeremy and myself are waiting to go ahead with this

Gday,

Yep I have all my money ready to go but I was holding out to see what’s happening with the HPC, any response from them?

I'll just get the HPC and hope it works out ok, there is no way I’m forking out $350+ in Aus for the stuff :laugh:,

So I’m in for the extractors w/ 2.25" outlet, gasket, economy, HPC

Jezz I hope the other guys know the date is coming up fast,

ohh and what’s the deal with payment and stuff?

Regards Sean'O

(...........well that makes 4 woot :sorcerer:)

cool stuff Sean'O

ok guys. HPC coating was orignally just on the outside.

but i have sweetened it to get done both inside and outside and in silver for the agreed price

Sean'O if you are in, that makes 4 and we are good to go

Hi Eugene

Sorry for the delay - bloomin' computers!!

Since you guys are buying bulk, I will have the headers done in HPC coating internally and externally and is in silver for the agreed price.

Hope this suits everyone.

Charlie

in regards to payment:

- check first post for your total, make sure everything you ask for is correct and the total adds up accordingly

- confirm in pm with me if you wish

- i will pm each of you with my bank details to deposit and please include your forum nickname

- pm me back the reference number as well as your desired delivery address

- i will pay all the fees associated with international transfers (since i was going to buy them anyway)

- then i will just make 1 large payment as opposed to doing 4-5 seperate ones.

- then we wait.

Hey Eug,

If that's the case with the coating then i'll get it coated to. :D

Edited by Traditimeour
Hey Eug,

If that's the case with the coating then i'll get it coated to. :P

no worries jeremy.. 1st post ammended.

i'd like everyone to check if everything i have stated in the first post is correct.

ultimately we'd like to get everything done, so it can be in oz in time for christmas - otherwise we'd be looking at a january/february 2007 delivery because of christmas - cos of their holiday.

just a heads up to those involved.

Dude you rock!!!!!

yeah i knew there may have been a bit of "cost cutting" for $170, thats why i was a bit :rofl:, ohh well we all get a better deal now eh :D,

This is going to be the best christmas ever! lol

Regards,

Sean'O

alright guys,

i've sent off another email. if you can please ask these questions much earlier - as its difficult to correspond with them in multiple emails.

please check their terms and conditions on their site:

http://www.partsco.com/partsco-hibernate/legal/terms.jsp

i will be collecting payment now, please check your PM inboxes.

Hmmm,

"Orders will be sent to the delivery address that you provide us with. We cannot be held responsible if this delivery address is incorrect"

lol, no pressure Eug but I’m going to double check you have my correct address in my pm :)

"Once the goods have been received by you, all risk of damage to, or loss of, the goods shall pass to you"

Well that sounds pretty reasonable really, its the same with every other product because all they are doing is selling it, so why should they be responsible if the product is dodgy eg: like a TV that doesn't turn on. I would assume that they do have a manufactures warranty by Coby however (just a guess but generally if you find something wrong with a product before you even use it, it can be returned), even though getting it back and replaced will be a bast*d :)

As long as we follow the "instructions" for care and proper use etc, i don't think we wouldn't even need a "XXXX km's" warranty, hell the Coby warranty will probably be in the box with the instructions :wishful thinking:

It’s all good,

Sean'O

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yeah i found that alot of parts can be wrong or "very" hard to get the real right one. I already bought some brakes years ago on me "old" GT calipers and they were wrong too 😄  I told them too. Even send them pictures...but they said "EBC catalogue has them on my car... So i dont know what their answer will be. I call monday them and let them know that they are really not on my car. If they were they would be already on a car...
    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
×
×
  • Create New...