Jump to content
SAU Community

Recommended Posts

Hi all, as some of you may know i am selling my car due to an knee injury i did snowboarding, the other week i got in my car and noticed when i put my foot flat to the floor at around 5000rpm the car would cough and splatter (almost like it was hitting rev limiter at 5000 not 7000 {but the engine kept reviing to 7000rpm while coughing).

I took it to a mate and he said it could be the AFM being dirty, i got some auto elec contact cleaner and cleaned the contacts... this did not work.

As long as the pedal is not flat to the floor it will act normally but as soon as it hit the floor and 5000rpm it starts playing up.

I was thinking it may be a turbo problem.... is there a way to check wihout pulling it off the car?

Car is as follows

1993 - ECR33. GTST

5 Speed Manual

Front Mount Intercooler

Cold Air Intake

Pod Air Filter

3.5in Exhaust

Turbosmart BOV

It is currently running about 7psi although i did not have a boost guage connected to the vacuum hose for about 3 weeks as i was making a custom mould for it, then when i connected it back up it was reading about 7psi instead of 10psi... same guage same everything just different location... i think the engine problem may have happened around the same time the boodt guage got connected back up....

As the car is still for sale any help would be gratefully accepted.

Thank you....

Craig

I'm sure Sydney Kid will post soon and clear this up if its wrong.

I have exactly the same problem so have been doing some searching. Seems that R33 GTSt's run extra rich. The problem we could we be having is its running so rich, it splutters and carries on.

As soon as you wack a pod on their, its going to see alot more air, the ecu over compensates and rich and retards like crazy.

Everyone always says coil packs first up, for everything... check them for sure, but I'll put money on it NOT being them.

Check them by pulling them out and see if they look shit for starters ( like cracks or anything ). Then get a work shop manual and work out which pin to the base should have what resistance. I did this ages ago when I was assured I needed to invest in split fires, turned out it wasn't the coil packs at all.

To fix mine, I intend ( when I get paid this month ), to check the afr's and see just how rich it runs on a dyno.

Will check things like O2 sensor, TPS ( as it seems to always be fueling up when I back off and wants to just cruise rather than decel ), then to resolve the problem, either an SAFC or if I feel super keen, full after market ecu so the timing can be controlled aswell as fuel. ( LT12 is what I'm thinking, sorry to stray from powerfc culture... don't hate me)

I would be a bit concerned that the boost is reading lower - are you sure you dont have a leak somewhere?

factory boost with and exhaust should be higher than 7psi

What boost u running or what does it say

what spark plugs did u use and what gaps are u running

he is around

just doesnt answer as much (at least i think anyway)

given majority of the questions in here have been answered before and a quick search would give u the better answers in the past

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah that is not actually a lot. Just painting my GTR frontend and the little bits to make sideskirts/nismo flare pieces work correctly/fit on the sedan/mount up correctly came to about $7000. Is it a lot? Sure. None of this is economical. Economy would be shelling the car and buying a 2010 Corolla to commute in. The perspective of all of this is different.
    • I have the re003s’ on my 06 XT Forester Turbo and I highly rate them for street wet and dry
    • I don't see any issues here. I've been saying all along this is a big job, the price reflects that.  When the car comes back perfect I'm sure it will feel like money well spent. 
    • Remember, take original quote. Double it. Then add a bit more. It's how any project goes.
    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
×
×
  • Create New...