Jump to content
SAU Community

Recommended Posts

headerzo1.jpg

Thx for everyone that has participated in EXE DYNO DAY...

it was a great turn out, great wheather too... big surprise on the day was the stock MPS3 pulling 161.7 KW ATW... very impressive result for FWD 2.3 L4 turbo running on stock setup, stock 4psi boost... dynoed at the 5th gear... also tran with his secret upgrade ^_^ and alistair with great output on mildly modded soarer...

hope the result from this dyno day can be a useful reference for whoever interested modding their particular car in the future (keep in mind that wheather, different dyno, humidity might have slightly different result). detail mod of the relating car can be asked directly to the owner of the car in your forum...

RESULT

======================================

212.0 KW ATW - Tran (blacks14) - RWD - 200sx S14

168.8 KW ATW - alistair (Aldmo87) - RWD - Toyota soarer

162.4 KW ATW - Silas (Flameboy) - RWD - 350Z (pod filter)

161.7 KW ATW - Cain (KRNAGE) - FWD - MPS3 (stock)

155.9 KW ATW - Dano (DFAULT) - RWD - R32 GTS-T

144.5 KW ATW - Hany Khoury (Hayness) - RWD - 180SX

140.2 KW ATW - Braedyn Corbani (corbz) - RWD - 200SX S15

131.5 KW ATW - Thao (fknidt) - FWD - civic vitR

130.6 KW ATW - James Caws - RWD - 96 Falcon Ute XH

127.5 KW ATW - Joel (Astro) - RWD - RX8

127.2 KW ATW - Stephen (takahashi) - RWD - RX8

126.7 KW ATW - William (YellowRX8) - RWD - RX8

122.9 KW ATW - Jorge (fly_sri) - FWD - Astra SRI T

120.2 KW ATW - Gaspar (typeG) - FWD - Accord Euro *4th Gear*

119.9 KW ATW - Yohan (Curik) - FWD - Accord Euro *4th Gear*

119.4 KW ATW - Andrew H (auzoom) - RWD - RX8

118.4 KW ATW - Kit (Kitbkk) - FWD - Accord Euro *4th Gear*

118.3 KW ATW - Bryan (silver_slug) - FWD - Corolla Sportivo

114.4 KW ATW - Jarrod (jarrodgt4) - AWD - celica GT4

103.0 KW ATW - andrew (Sandy) - FWD - Mazda3 SP23

98.0 KW ATW - Daniel (Dantze) - FWD - 206 GTI

97.8 KW ATW - Chee (sheepo) - FWD - Mazda3 SP23

97.0 KW ATW - Brian (Chompies) - FWD - Mazda3 SP23

94.7 KW ATW - Cam (Cam) - FWD - Mazda3 SP23

88.0 KW ATW - Jason (Unco) - FWD - Mazda3 maxx sport

83.7 KW ATW - Jules (RME1) - FWD - Corolla 1zzFe

75.3 KW ATW - Kate Vanderlugt (91cel) - FWD - 91 Celica 5SFE

67.6 KW ATW - Songaz (fitz) - FWD - Jazz Vti-S

======================================

PHOTOS CAN BE FOUND HERE (no 56K): http://www.exe-crew.com/forum/viewtopic.php?t=999

(i couldnt post the pics up here because of this forum post limitation... )

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...