Jump to content
SAU Community

Recommended Posts

If you want load and angry.....straight through custom 3" pipe and hot dog with no silencer.

yer, i got this, 3" with just a hotdog at the end off hiflo cat and 3" batmbl dump

surprisingly not that loud (probably over 92 decibels though)

sounds great though

not even that droney

I have an SR20, but have a custom 3" exhaust with a hot-dog and a small cannon. Sounds pretty angry. A workshop thought that I had cams because of the way it idles. I told them that it was almost impossible because I bought the car stock and had not done any cam work to it.

I have:

Batmbl front split dump

Metal Cat highflow cat

Apexi N1 catback

The apexi part has a muffler in it about half way down, the difference I've noticed between this on my car and other R33's with full length exhausts is mine tends to be quiter and idle, and mine also seems to have a lower or deeper burble to it.

That all changes once you hit boost though, you get that lovely metalic almost sound of the turbo spooling then the exhuast just starts to get angrier then by the time you hit 'high' boost it sounds like it just wants to take off.

I'm very happy with my exhaust combo as you can probably tell.

My Fujitsubo is loud. And I mean LOUD.

about 97db.

3.5 inch centre, 3" rear. I have taken the rear section off and swapped for a Magnaflow 3" for street driving because the Fujistubo is too loud.

I have:

Batmbl front split dump

Metal Cat highflow cat

Apexi N1 catback

The apexi part has a muffler in it about half way down, the difference I've noticed between this on my car and other R33's with full length exhausts is mine tends to be quiter and idle, and mine also seems to have a lower or deeper burble to it.

That all changes once you hit boost though, you get that lovely metalic almost sound of the turbo spooling then the exhuast just starts to get angrier then by the time you hit 'high' boost it sounds like it just wants to take off.

I'm very happy with my exhaust combo as you can probably tell.

How much is the split dump you have?Does it go all the way into the cat like a front pipe?How much for SAU members?

CHEERS

How much is the split dump you have?Does it go all the way into the cat like a front pipe?How much for SAU members?

CHEERS

Pipe goes from turbo to cat. Seperates the wastegate exhaust gases from the normal exhaust gases for a fair bit, =better for power than the all combined units you see getting around.

Last times prices were: $395+$15 delivery for the mild steel

or

$410+$15 for the stainless.

I got the stainless.

I suggest you contact Batmbl via pm.

Check it out: http://www.skylinesaustralia.com/forums/in...showtopic=74022

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...