Jump to content
SAU Community

Recommended Posts

use a beanie. checkout the drift mags, all their resoviours have beanies on

does is really work..?? hmm i didnt think about shielding i was more thinking about fitting a tranny cooler onto the PS lines..

cause i boiled the PS fluid today.. got a max of 90 oil temp on engine.. and a rattle comes from the PS pump after a few runs. ther is a lil rattle from the pump after a long drive too.. only when PS fluid is warm.. think it is time to flush... haha

lol, u guys are funny to listen to.

yea im gonna weld on my ssq bov, via its adapter (duh) rofl.

like this

post-40676-1191412538_thumb.jpg

blow off valve? what bov officer?!

lol

come on dan.. u knw u wanna run no BOV and just get chatter.. my bov is set on hardest and i get mean flutter unless im absolutly caining it..

which is fully sick uleh and gets all the hondas reved up.. speaking of hondas.. on the way back from the track.. i came up behind a blue civic with plates 50HCT... the rear control arms wer cusco's colour.. and had exhaust.. so came up next to him only to have him flutter at me rev pop second and take off... bahaha VTEC KICKED IN... vtec turbo yo

why dnt u just get a adaptor for the standard position..?

lol

come on dan.. u knw u wanna run no BOV and just get chatter.. my bov is set on hardest and i get mean flutter unless im absolutly caining it..

which is fully sick uleh and gets all the hondas reved up.. speaking of hondas.. on the way back from the track.. i came up behind a blue civic with plates 50HCT... the rear control arms wer cusco's colour.. and had exhaust.. so came up next to him only to have him flutter at me rev pop second and take off... bahaha VTEC KICKED IN... vtec turbo yo

why dnt u just get a adaptor for the standard position..?

lol, names not dan. yea it would be sick to have a dose going [u dont know it, look on utube]. ive already got it in stock position and adapter. but due to highmout setup, i have to get a front facing plenum, which = custom welding and shit. because ur removing the crossova pipe u hAVE to weld on the bov.

also im puttin the afm in the intercooler pipe, before it, so u cant see it = hello bellmouth turbo :P

lol, names not dan. yea it would be sick to have a dose going [u dont know it, look on utube]. ive already got it in stock position and adapter. but due to highmout setup, i have to get a front facing plenum, which = custom welding and shit. because ur removing the crossova pipe u hAVE to weld on the bov.

also im puttin the afm in the intercooler pipe, before it, so u cant see it = hello bellmouth turbo :P

or use a MAP SENSOR.. time for a dejetro i think...

well the blitz skyline uses/used the afm after the cooler.. that thing puts down 500hp with a GT500blitz turbo...

ur name is daniel correct.. then ur nice name is dan... end of story..

lol, yea u like that dont u

for those of u with ceramic or plastic wheels

U DONT WANT TO KNOW HOW THEY DO THAT

BAAAAAAAAAAAAAAAAAAADDDDDDDDDDDDDDD IDEA

but is = = =ROFL only on a vl from da hills

Edited by r33cruiser

lol, yea u like that dont u

for those of u with ceramic or plastic wheels

U DONT WANT TO KNOW HOW THEY DO THAT

BAAAAAAAAAAAAAAAAAAADDDDDDDDDDDDDDD IDEA

but is = = =ROFL only on a vl from da hills

LOL RB30DET...

that has more wank factor than that CIVIC VTEC TURBO that wanted to run me..

does is really work..?? hmm i didnt think about shielding i was more thinking about fitting a tranny cooler onto the PS lines..

cause i boiled the PS fluid today.. got a max of 90 oil temp on engine.. and a rattle comes from the PS pump after a few runs. ther is a lil rattle from the pump after a long drive too.. only when PS fluid is warm.. think it is time to flush... haha

Id do what youand buy one of those coolers and plumb it in.Doesnt have to be huge as long as it has a bit of direct air goin on to the core.

Id do what youand buy one of those coolers and plumb it in.Doesnt have to be huge as long as it has a bit of direct air goin on to the core.

hmm ok.. i think i might run the cooler before the pump inbetween the the resivour...

ill try a flush before.. and see how it goes..

Well if your interested the next general motorkhana is on november 18th down gympieland.

For this one it's $30 entry and you have to have some sorta of racing licence and a road registered car. You don't get as much track time though as there are between 40-50 entries for the day. But i kinda like watching the others inbetween filling in time. You learn what not to do!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...