Jump to content
SAU Community

Recommended Posts

Does anyone know where you can buy r33 specific A-Pillar Pods from need one and could not be bothered trying to buy online, also how much am i looking at for one?

Thanks Zac

try autobarn or nengun.

haha got my turbo timer today, cameron was very helpful at autobarn. also the other worker there (forgot his name) got his suzuki swift back today...was being worked on for a year...he got it turbo charged!!!! haha was so funny. also got to check out james' audio set up and how it sounds..bloody loud...2x 1500rms amps. nicce!!

try autobarn or nengun.

Where is Nengun, and what would you guys recomend for gauages 1 will be boost so i will have one spare, what should i put in? Also what is a good accurate brand that is reliable?

haha got my turbo timer today, cameron was very helpful at autobarn. also the other worker there (forgot his name) got his suzuki swift back today...was being worked on for a year...he got it turbo charged!!!! haha was so funny. also got to check out james' audio set up and how it sounds..bloody loud...2x 1500rms amps. nicce!!

Nice, i'am heading down tommorow talked to cameron on the phone today, said it should be in soon and even if the sale ends he will sell it to me at the sale price. I will have a look for some r33 specific a-pillar pods tommorow while i'am there.

Your not that bloke with the non turbo Pulsar are you? Think we met you at Matilda one night...

If so, i wouldnt be running your mouth because you cant beat Skylines...

And for your information, Ryda's old r33 (which he has now sold) used to keep up with Turbo Skylines.

Chris

hahahahahahahahahhahahahahahahahahahah

nah mate sorry that aint me...xo

Lets see, the cars I can remember SR_PWR having, and I've had a ride in every one are, white 180sx (TD 06-20G turbo'd), another 180sx , white r32 gtst, white r33 gtst (200kw?), 600hp red series 5 rx7, silver s15 200sx, gun metal r32 gtr, some poxy 4wd, ohh 300kw rb25 silva, orange 180sx (180kw?) and current is a 180sx.. though i haven't been in that one but i'd say it's be around 230+ rwkw..

thanks matty, neally had them all hehehe. i admit it i am a car whore :) current 180 now since i can run more boost im guessing has anything from 270 to 285rwkw, this is the car list. sad i know

1) rb20 180sx

2) r32 skyline gtst

3)sr20 180sx

4) sr20 180sx

5) toyota soarer 260rwkw MANUAL

6)series 2 r33

7) r32 gtr

8) sr20 180sx

9) rx7 series 5 511hp

10) 96 toyota supra

11) toyota hilux

12)mitusbshi pajero

13) nissan 200sx s15

14)toyota sprinter

15)sr20 180sx

16) rb25 silvia -300rwkw

17) sr20 180sx- 280rwkw

and for u skyline boys i loved the gtr and 32/33.

Where is Nengun, and what would you guys recomend for gauages 1 will be boost so i will have one spare, what should i put in? Also what is a good accurate brand that is reliable?

nenguns just around the corner from mine, like a local shop BAH :)

Got a quick question do you guys know anyone that has bought and installed this product and how does the boost reading not need recalibration.

http://www.amecautocare.com.au/R33300Kits.htm

careful there rabit001. i was going to install a gtr nismo 300km/h set too. but you have to lodge it will qld transport, so they can document the km's and crap. if u dont do this it is illegal. i was also told i needed to get it recalibrated aswell.

careful there rabit001. i was going to install a gtr nismo 300km/h set too. but you have to lodge it will qld transport, so they can document the km's and crap. if u dont do this it is illegal. i was also told i needed to get it recalibrated aswell.

It’s people like you who make it harder for me to clip the kays back on cars :laughing-smiley-014:

Honesty is a bitch :thumbsup:

careful there rabit001. i was going to install a gtr nismo 300km/h set too. but you have to lodge it will qld transport, so they can document the km's and crap. if u dont do this it is illegal. i was also told i needed to get it recalibrated aswell.

really? so how does it work, the lodgement that is...

Does anyone know where you can buy r33 specific A-Pillar Pods from need one and could not be bothered trying to buy online, also how much am i looking at for one?

Thanks Zac

Hey,

Didnt i give you that ebay link for the genuine Greddy A-Pillar Pod???? Its custom made for the r33....thought you were bidding on it?

Cheers.

Hey,

Didnt i give you that ebay link for the genuine Greddy A-Pillar Pod???? Its custom made for the r33....thought you were bidding on it?

Cheers.

Yeah i was there is still about 2 days left and it is up to $70.00 already would be better off going and getting a new one. What other gauge should i put in my care beside a boost?

Yeah i was there is still about 2 days left and it is up to $70.00 already would be better off going and getting a new one. What other gauge should i put in my care beside a boost?

The cheapest pillar pod at autobahn is $129 - And thats on special...Isnt Greddy or anything reputable at all...

Just do what Cruiser and I did when i had my old r33....buy the $29 one off ebay..they work fine...

In regards to your gauge issue..

I'd buy 1 x Boost and either 1 x Oil Temp Gauge/Oil Pressure Gauge or 1 x Voltmeter/Fuel/Air Ratio....

My 2c...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
×
×
  • Create New...