Jump to content
SAU Community

Recommended Posts

jeeez take it easy, just trying to help out.

Marty does the work himself, he has no help ,thats probably why it would take him longer to do a clutch for a skyline.Have you ever lifted or fitted a R33 or 34 gearbox by yourself or? They aint light i tell you.

Just a bit of food for thought.

Marty does the work himself, he has no help ,thats probably why it would take him longer to do a clutch for a skyline.Have you ever lifted or fitted a R33 or 34 gearbox by yourself or? They aint light i tell you.

Just a bit of food for thought.

Thats fine If you happy with your guy you should stay with him. Its hard to find someone you can trust these days.

As far as the job its self goes, I do know a thing or 2. done about 25 - 30 of them by my self (with a gearbox jack tho) in the past couple of years.

hope it all turns out good for ya is all.

Hey Chris, when's the 180 back from paint?

The painter said that it might of been ready today but i knew it wouldnt. At this stage mid next week.Im not in a rush for it as i want a great job, but at the same time im hanging to put it back together.

took me ages to reply on here lol. who are the skyline crew that sit up on alex hill every now and then? i can mainly remember a silver 33 a red 32 without a wing. im in the white 33 wha13.

do i know you 85urk lol have we ever met?

um, no not officially i dont think, im darren anyway. i was pulled up at 711 one night across from macca's when your car was there but i didnt get to meet you. anyway usually am at 711 servo on sunday arvo's chatting with a few mates. seen u drive by yesterday.

he has a f**ken sweet white silvia with a black vented bonnet with clear tail lights, r31, orange 180 and a few lines all in the same shed.

also has this big yank tank thing....very nice.

Edited by r33cruiser
oh ok cool as do you drive a liner? if so what colour and shit come say hey next time dude. I think the skyline boys on the coast should call themselves l1n3r b0i5

um i own the white r33 with plates 85URK? u seen it round. i even saw you today in your car down wises rd but i was in work car.

i saw your car today 85urk at where your work probably is. what is ur name man? yeh marty is working on nealy everyones now he may need to hire more people lol. i am seeing him tomoz about my belts and some other shit to clear my defect.

he has a f**ken sweet white silvia with a black vented bonnet with clear tail lights, r31, orange 180 and a few lines all in the same shed.

also has this big yank tank thing....very nice.

The silvia has a white vented bonnet, not a black one and the yank tank is called a lincoln with a ford 400 cubic inch V8 in it, both cars arent his, but yes you are right they are sweet.

Who's silver R33 with a by the looks of things with a decent gt3540 on it also there.?Must have at least 350kw....... ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...