Jump to content
SAU Community

Recommended Posts

so anyone know of anything happening this weekend? i am going down maroochydore this arvo to get some new tyres put on the car and i think they are going to need breaking in, maybe cruising in montville or yandina so i can go horse riding :D

ive been awake since 5 am a jog, a swim at the beach and a few red bulls. i am a little hyper this morning ^^

anyone got any 5stud rims for sale 5/114.3? id rather standered s15/gtt/r33 wat ever. anything cheap!!!

Man I got heaps! cheap as too. come to my work 3/21 premier cct pick out what you want & make an offer.

mon - fri 8 - 5.

Man I got heaps! cheap as too. come to my work 3/21 premier cct pick out what you want & make an offer.

mon - fri 8 - 5.

Dont do me out of a deal.

Again, I have 2 x good condition sets of R34 GTT Rims in Silver.

Happy to let you have them for around $400 o.n.o.

If your an SAU member, happy to look around $350 or maybe lower..Just depends on how much i like you :D

Ha.

Cheers.

Man I got heaps! cheap as too. come to my work 3/21 premier cct pick out what you want & make an offer.

mon - fri 8 - 5.

interested.

Looking for some 16X7's with around +30 offset. I got no idea what the specs of stock nissan wheels are except r34 gtt's are 17's. I have a cressida that is undergoing brake upgrade. Currently has 16X7's +50 from jzz30 and it is fouling the caliper. Thanks

well my cruising idea went out the window.

who wants to come round my place tommorrow and help me with my remote central locking that has stopped working :D any takers?

plus side. i got my other lense clear!!!!!!!!!!

all it took was sand paper followed by cut and polish followed by scratch x

Dont do me out of a deal.

Again, I have 2 x good condition sets of R34 GTT Rims in Silver.

Happy to let you have them for around $400 o.n.o.

If your an SAU member, happy to look around $350 or maybe lower..Just depends on how much i like you :ban:

Ha.

Cheers.

Those rims come with any tread? :D

interested.

Looking for some 16X7's with around +30 offset. I got no idea what the specs of stock nissan wheels are except r34 gtt's are 17's. I have a cressida that is undergoing brake upgrade. Currently has 16X7's +50 from jzz30 and it is fouling the caliper. Thanks

changing the offset wont necessarily make it clear the caliper, the shape of the spokes can still cause a problem. But I did just take some wheels off an aristo that may suit your needs?

I had some 16x9 supra rims which we sold to scrap metal the other day! bummer.

changing the offset wont necessarily make it clear the caliper, the shape of the spokes can still cause a problem. But I did just take some wheels off an aristo that may suit your needs?

I had some 16x9 supra rims which we sold to scrap metal the other day! bummer.

Yeah I understand what you are saying. I have been told that jza70 will fit, also awd magna tl and they are both 16X7 +44. Just wondering if any stock ford wheels would fit. AFAIK older ford are +10 and newer are +50 so???

Yeah I understand what you are saying. I have been told that jza70 will fit, also awd magna tl and they are both 16X7 +44. Just wondering if any stock ford wheels would fit. AFAIK older ford are +10 and newer are +50 so???

Yeah ford wheels might fit. I dont have any though, only jdm stuff.

Hey guys,

What did everyone get up too last night?

I came out to my car and found that someone wanted to key my car.

It goes from on the bonnet in circles all the way down to the passenger side to just past the rear wheel.

It is f**ked have to pay $1400.00 excess and then pay a extra $400.00 next year.

Why?

nah i meant saturday lol but now i gotta sort out whats wrong with my car. windows are going up and down as a snails pace. my remotre central locking wont work but thankfuly the control still works so that the imobiliser does not stop me from driving. if any of you guys have any idea what it could be give me a buzz!! im desperate.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • jeebus. glad you weren't under it while performing the stunt. Also thanks for the link to the wheel measurer, exactly what I needed
    • In the older stuff there were very significant differences 2wd to 4wd, for example Stagea had strut front end for 2wd and double wishbone for 4wd so it was not minor to swap. From poking around the 2wd v37, it *looks* like it might be more possible; some of the parts specifically have "2wd" stamped on them which suggests the platforms are more similar. You'd still want to start with a 4wd half cut to swap stuff from though. I'd suggest if you don't have a tune on the ECU you don't really need one on the trans either. Throttle mapping is in the ECU side (and you can always use a Roar Pedal if you want the throttle to actually respond to your foot), and really if you are happy with the stock power you probably accept the stock trans behaviour too....its all made to be "sporty" not racey.
    • So, updates. I have not washed the car since it came back from Tassie. I've driven it around a bit but not got around to actually sorting it out. I DID raise it because I cracked the rear bar leaving a hotel which was very distressing. Interestingly, the car drives more compliant now that it's raised a fair bit (5mm front, 15mm rear). Also noticed that my FR height was 10mm lower than FL. So that's now sorted out, too. I also bought this and had it printed: https://www.etsy.com/au/listing/1576422240/wheel-and-tire-fitment-tool-universal?ref=shop_home_feat_1&dd=1&logging_key=08f604d9fa4cc383550ba985e6ac85cd5cac7fbb%3A1576422240 Now, if I was smart I would have taken my brake calipers off to actually use this correctly but it was evident enough to me that in the region where the caliper was... there was nothing to hit suspension/guard/arm wise. So I'm going with "it'll be fine" after using the tool to hopefully very precisely measure the wheel clearance. Also while doing this, I had the very VERY bad idea of jacking one of the wheels/suspension arms up while the rest of the car was on jack stands. I did this to see how the arm would travel. This all was well and good until the car slid off the stands and went through a fence. So don't do that. Incredibly nobody was hurt and there was only minor damage to the rear bumper as the car didn't have far to slide, and had 3-4 wheels on it. The only damage turned out to be the fence itself which was easy to fix, and a little bit of damage to the fibreglass rear bumper trim. I had already planned to try a touch up paint kit to fix the time I drove into my garage door to see if it'd help in the interim before I get it fixed properly. I used the Dr Colorchip kit after looking online and seeing everyone talking about it. Yes it's made for chips and not huge broken missing pieces and I'll be 500% recommending it for stone chips after using it for stupid things like me. This took about ... 10 minutes and looking at the half assed photo the 30 second job I did on the bumper corner was almost perfect just by using the tiny little brush and painting it in. The sealact stuff to remove over-painting is really useful, so if/when I do it again I'll likely slather the touch up paint well over it and then clean it up with the cleaning solution. The wheels should arrive in a couple of weeks. I am still kinda confident after doing a stupid amount of measuring (and borrowing a set of 18x10.5+15) that they will not fit because I overlooked something, somehow and flew too close to the sun. ALSO R34 GTR guard liners do not fit on a GTT. I bought the undertray brake duct guides and had the wonderful problem of them not fitting my intake, my oil cooler and the liners themselves were even worse. Attempting to fit them won't work in general - You would have to cut them up as another poster mentioned as the bodywork is different on the GTT. At least I can try to resell them. So instead of cutting those up, I cut up my old already-cut-up GTT liners and extended them by using some PP plastic and drilling some 8mm holes for some nissan clips for the 'extra' bit. Because I was happy to cut them I was able to mount them pretty damn forward so I now have some semblance of guard liners, and the brake vents seal the bumper from the bottom. It sort-of-looks like this, to give some idea - If you look at the GTR and then the GTT this is when I realised that I needed to seriously measure as the inside of the rim area is entirely, entirely, entirely different and could not take any internet measurements for granted.   
    • If you are Ecutek tuned then these TCU tunes are anywhere from $550 to $700 usd. If you are not ECUTEK tuned, then it gets costly!    
    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
×
×
  • Create New...