Jump to content
SAU Community

Recommended Posts

Hello

1996 SII Nissan Skyline GTS-T Stock Turbo

The problem I was having was my car had a massive power drop felt like I was driving a Mini Moke lol but my turbo was still blowing off spool and reaching 11psi but it felt like it was going nowhere, first and second gear were always good first time the car was started but after that they were all the same and powerless. I was told it maybe spark or the coil packs replaced the spark plugs and test the coils no problem there.

After running the car for awhile when I came to a full stop 2-4 seconds later I would here a click noise but not always.

Anyway I put it on the dyno it ran like crap as you can see below.

Anyway these were the symptoms I was having and it turns out it was the waste gate had worn a grove in the manifold and was catching and staying open then after awhile closing (clicking Noise)

All I did was take it off Die Grind the grove so it was smooth now it runs 100% thought I would share it here on the forum might save someone a lot of money, shame it was too late for me.

Pictures Added

post-31583-1162097449.jpg

post-31583-1162097492.jpg

Dyno Result

sundayoctober292006je6.th.jpg

Edited by Woody1
Link to comment
https://www.sau.com.au/forums/topic/140879-massive-power-drop/
Share on other sites

Just to alleviate any possible confusion:

That's the turbo dump pipe in the top picture not the exhaust manifold. Exhaust manifold is the exhaust pipe work coming off of the head & in this case is between the head & the turbo.

Good pick up on the fault.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...