Jump to content
SAU Community

radar detectors - whats good?


Recommended Posts

Guest crackity

well if anyone else is looking for detectors ive noticed that they are the one thing that actually goes for a cheap price on ebay.

just make sure the seller ships internationally. HEAPS of cheap cobra detectors...uniden are about twice as much, and bel are 3times as much.

What about these new radar detectors the cops have.

They don't stick outside the car anymore, its this bache round thing that sits on the drivers side, near the pillar.

They also have one at the back, that picks up speeding cars behind them.

Are they using the same frequency?

From what i can remember the jammers are illegal and the cops can usually detect the radar jammers, but the radar detectors are passive, so there is no way to detect them other then noticing them... Besides the radar detectors are legal...

I have a V1, bought from the States. Detects all frequency bands used in Australia including Laser Guns. The only thing it does not pickup is road-based sensors type of cameras like red light and fixed speed.

It offers detection from Front, Rear, Left & Right. Approximate distance 1KM usually. Also indicates number of signals picked up and from which direction. Also includes distance to signal strength like commonly found in radar detectors. Price - AUD$1000 approximately with all accessories including concealed mounting.

http://www.valentine1.com/

:uh-huh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...