Jump to content
SAU Community

7 To 11 Test'n'tune Nov 2nd @ Willowbank

17SOK

By 17SOK,
in Queensland

 Share

Recommended Posts

17SOK Collaborator

17SOK

Posted
Posted

Just wondering if anyone from SAU is going to the 7 to 11 test and tune tomorrow night?

I did have a few mates who were going but it appears they are now wearing skirts and don't want to go... Need to organise a bunch of people to cruise out with :(

Also wanting to know if there will be anyone who has a support crew who wouldn't mind looking after my spare tyre, tools etc when I'm racing :yes:

Cheers.

SilverECR33 Veteran

SilverECR33

Posted
Posted
Just wondering if anyone from SAU is going to the 7 to 11 test and tune tomorrow night?

I did have a few mates who were going but it appears they are now wearing skirts and don't want to go... Need to organise a bunch of people to cruise out with :rofl:

Also wanting to know if there will be anyone who has a support crew who wouldn't mind looking after my spare tyre, tools etc when I'm racing :rofl:

Cheers.

hi mate, pm sent, im interested in going, finally some nights off this week, havnt ran my car yet. ..

17SOK Collaborator

17SOK

Posted
  • Author
Posted
just find a security guard who would be happy to sit on the tyre and fall asleep on it for you.

Tried that one last time... Asked if I could leave my jerry can near the scrutineering desk and they basically said it may not be there when I got back... Luckily for me it was and I had enough fuel to get home :rofl:

17SOK Collaborator

17SOK

Posted
  • Author
Posted

12 flat ???

Nah... seriously mid to high 13s would be good.

I've run a 14.1 @ 100 mph on a 2.3 second 60 foot... so if I can get my 60 foot times down, high 13s should be realistic.

... Mods are EBC, power FC, pod filter, high-flow cat, and catback exhaust... Everything else is stock (standard SMIC and standard turbo).

r_speedfreak_r Proficient

r_speedfreak_r

Posted
Posted

hey i dont know if this will help but last time i went out i took my stockos and changed from my 18s while i was there. i just left my 18's with the jack under a sheet i put in my car so not to dirty the seats and left them on the grass around other parked cars and people. I was worried first and kept checking up on them but i quickly relised they were fine. Although now ive posted this on the net it might be a different story, nobody get any ideas.... lol

SilverECR33 Veteran

SilverECR33

Posted
Posted
Hey mate, I will definitley be out at Willowbank tomorrow night. But unfortunatley I am also without pit crew :)

I wish to go to, but now i have an issue with needing a helmet :). on such short notice i dont have a helmet to use..

Del Sol Enthusiast

Del Sol

Posted
Posted
I wish to go to, but now i have an issue with needing a helmet :). on such short notice i dont have a helmet to use..

You can buy the helmets pretty cheap. I have seen them at the motorcycle shop on the corner of Moss St. and the M1 service road starting at about $70 from memory. :)

SilverECR33 Veteran

SilverECR33

Posted
Posted
You can buy the helmets pretty cheap. I have seen them at the motorcycle shop on the corner of Moss St. and the M1 service road starting at about $70 from memory. :ninja:

ahh nice, cheers ill check em out next week. well if i cannot borrow one, looks like i wont be joining yaz tomorrow night.

gettin me green stuffs and other bits this week bit more important than a helmet.

have fun.

SilverECR33 Veteran

SilverECR33

Posted
Posted (edited)
ahh nice, cheers ill check em out next week. well if i cannot borrow one, looks like i wont be joining yaz tomorrow night.

gettin me green stuffs and other bits this week bit more important than a helmet.

have fun.

looks like i got a helmet. :) now just need to know where im going.. can someone pm me addy and some directions, i got ubd. so i should be ok?..

ps.. anyone got any room for my spares?

Edited by silverbulletR33
r_speedfreak_r Proficient

r_speedfreak_r

Posted
Posted
looks like i got a helmet. :happy: now just need to know where im going.. can someone pm me addy and some directions, i got ubd. so i should be ok?..

ps.. anyone got any room for my spares?

gees do you want me to drive your car down the strip for you too? lol jokes dw we've all had these issues before.

SilverECR33 Veteran

SilverECR33

Posted
Posted
gees do you want me to drive your car down the strip for you too? lol jokes dw we've all had these issues before.

lol , ended up using my 18"s for the job, just dropped the pressure to 26 psi. only went to 26 cause i still had to drive a fair while from the track on em.

Great meeting ya Chris. was a good night. my first time, ran a 13.93, not too bad i guess. just gotta work on my starts.

ps. shouldnt have jinx myself ;)

17SOK Collaborator

17SOK

Posted
  • Author
Posted

Good to meet you too Dale... Was a very good night (except for the oildowns!)

I ended up running 13.96 @ 100mph so I got the time I was after.

Were some impressive times last night:

'Easy St' R32 GTR ET: 10.9 seconds

Marty (STZ automotive) SR20 powered celica ET: 11.6 seconds

Alex (GT Auto garage) R33 GTR ET: 12.0 @ 127 mph! (was definately bogging down off the line and falling off boost + struggling for traction on boost) - looking forward to seeing some low 10 second passes soon!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • EndZee
      R33 Gts/-t Abs Module Wiring Schematic (not Gt-r)

      By EndZee · Posted

      Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...