Jump to content
SAU Community

Recommended Posts

This group buy starts immediately and will conclude on the 1st of January OR when 10 pairs (20 in total) are paid for, whichever is the sooner. We need to have orders and payment for 20 individual tyres in total for the price to stand.

The product on offer is pairs of Mickey Thompson ET Street Radials (Drag Radials) in either 275/40/17" OR 255/50/16". We can have any combination of these sizes to comprise the order. The 275/40/17" sized tyres are known by Mickey Thompson as "blemished" stock. I have personally inspected the stock on hand of these tyres and they are incredibly hard to pick why they are listed as blemished. These tyres are cosmetically different (although usually un-noticable unless you're inches from the tyre) but are still 100% stucturally guaranteed. The 155/50/16" size are normal stock.

The prices we will be getting for these tyres are as follows:

255/50/16" - $245.00ea - (MSRP is $283.00ea)

275/40/17" - $225.00ea - (MSRP is $311.00ea)

The company that is supplying the products for the group buy is Rocket Industries

The products can be collected from Wollongong/WSID by prior arrangement or may be shipped road freight at buyer's expense.

Associated costs for delivery will vary depending on your location.

These tyres can and will typically drop tenths, sometimes quite a few of them off of your quarter mile ET. They're usable on the street so driving to and from a race meeting on them isn't a problem. I drive 107km to the track on them, let some air out of them, race, then put some air back in and drive 107km home!

Cheers,

Adrian

post-695-1162444546.jpeg

Link to comment
https://www.sau.com.au/forums/topic/141522-mickey-thompson-drag-radials/
Share on other sites

  • Replies 82
  • Created
  • Last Reply

Top Posters In This Topic

The 17's are very very good. They are MUCH better than Nitto NT555R's and I ran 1.68 60' times on those tyres. These are better again.

The group buy end date is in the first post. Quite a while between now and then.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Absolutely could be. I collected data logs from when the O2 sensor was still out and also after I had replaced it so will try to compare them. Pretty confident that the affect is lowered with the new sensor, will check logs at the same RPMs/conditions. 
    • Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
×
×
  • Create New...