Jump to content
SAU Community

Recommended Posts

some one please help!!!!!!!!!!!!!!

ive got no power at all......

no ignition lights.

no head lights.

no interior

central locking not even working. ect ect.

the starter motor isnt even clicking.

it seems like a totally flat battery, but i tried jump starting it and still got nothing. checked the conections. checked all the fuses in the boot, in the cabin, and also in the engine bay but all fuses are ok including the main fuse in the boot.

anyone got any ideas????????

Link to comment
https://www.sau.com.au/forums/topic/14228-my-r33-is-dead/
Share on other sites

The other battery i tried is excellent i use it in my other car no probs. ive checked all the fuses including the main fuse.

Gloof i do have an immobiliser, if this is at fault could this stop power to everything though?

Link to comment
https://www.sau.com.au/forums/topic/14228-my-r33-is-dead/#findComment-286913
Share on other sites

i found the problem..............

i must have left the interior light on, the night before it died which ment the battery was totally dead. then in the morning i had nothing tried to jump start it after checking all the fuses and it wouldn't even jump start so i continued asuming the problem was in the car...........

later with the multimeter in my hands i desided to check the jumper leads i was using for continuity. and to my surprise it turns out they where stuffed for some reason they whern't carrying the current??????? they where brand new antizap leads???????

so i tried a different older pair of jumper leads and it started...

end of drama....

Link to comment
https://www.sau.com.au/forums/topic/14228-my-r33-is-dead/#findComment-288111
Share on other sites

cheap jumper leads are worth their weight in packing foam. :D the el cheapo chinese ones have the cable crimped onto the ends through the insulation and generaly are open circuit. either buy decent leads or cut the clamps off, bare back the jumper cables and solder them onto the clamps.

usually even if they do make contact the actual wire is so small theyb wont pass enough current to start a car without glowing red hot and melting all the insulation off them :P

Link to comment
https://www.sau.com.au/forums/topic/14228-my-r33-is-dead/#findComment-288246
Share on other sites

Al

i know i should have just replaced it (now)

but i thought i had a serious prob. any way my mistake.

secoh

the jumperleads i was using where (looked) like very good quality. they are the anti zap ones 400amp from a good spare parts dealer. must have just been a dud set.

Link to comment
https://www.sau.com.au/forums/topic/14228-my-r33-is-dead/#findComment-291420
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Agreed, I've never seen a 260RS specific manual. As GTSBoy said it will mostly be stagea other than the engine loom https://www.hgeconsulting.com.au/stageaservicemanual.pdf
    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
×
×
  • Create New...