Jump to content
SAU Community

Recommended Posts

Matt Spry down on the goldcoast... $200/hr.

Allstar on the northside... $125/hr

These would be the only 2 I'd recommend based on there experience with PowerFC's and other ECU's.

But whatever tunner you use... make sure they will tune it to the ecu you have.

Richard at Allstar is very good. I use him exclusively. His prices are good and he now has all the software for ALL Power FC's.

He is a Haltech dealer and can tune any ECU.

Tell him Dave sent you and he may give you a discount. Even bigger discount for SAU Qld members. He will ask to see your membership card so don't try and con him!!

my skyline was tuned there (101 motorcafe), then the car moved interstate and they wanted $1000 for the code so I could retune her up here in darwin.

motec, 10sec_rx7, our w/shop up here and 33,000+ readers on a pf thread all know about it, and wont be going to 101. zoom, hot4s, perth street cars, race and another one... I have forgotten for the moment were going to do a write up about it.

As i often go Street drifting with Harry From 101, i can say they are a great bunch, definately know there gear. but its little things like Phee has encountered which rupture there good name. making money anyway possible is there attitude

No dis-respect to them, there workmanship. its just there ethics that are there downfall in my perspective.

Cool,thanks for all the places/numbers im in process now of ringhing the guys up and arranging times/prices etc... Juat a couple places that no one mentioned bob ramano and APC at springwood, these guys no good??? Donr wanna give places bad name, but bob ramano dudes seemed a litle arrogant on the phone, but it seems alot car places are...

Cool,thanks for all the places/numbers im in process now of ringhing the guys up and arranging times/prices etc... Juat a couple places that no one mentioned bob ramano and APC at springwood, these guys no good??? Donr wanna give places bad name, but bob ramano dudes seemed a litle arrogant on the phone, but it seems alot car places are...

OMG i went there about tuning my car... his son (cant remember his name) is the biggest tosser man so i know what ur saying, they specialise in WRX and holdens man, for a nissan take it to Godzilla Motorsport.

i would also recommend richo from all star, but it all does depend on which ecu you have and how far you wanna travel. PITS tuned a friends 33 after numerous other workshops stuffed it up.

Cool,thanks for all the places/numbers im in process now of ringhing the guys up and arranging times/prices etc... Juat a couple places that no one mentioned bob ramano and APC at springwood, these guys no good??? Donr wanna give places bad name, but bob ramano dudes seemed a litle arrogant on the phone, but it seems alot car places are...

I Actually use Bob as my only mechanic... he and his son chris do a great job on my car, he does sound arrogant sum times but thats coss he's so busy and his maner of speaking is quiet short and to the piont.

The only bad thing about him is that he wont let your car go on the dyno unless it is fully checked out by him, not bad prices charges me $99/hr for Dyno time. he handels many difrent cars but he does specialise in WRX and FORDS.... Chris is pretty good on the tuning but he has this problem about trying to squeez the most out of your tune, he just wont do it.

any way sorry about the ranting... consider Bob.....

But i would also Highly recomend Mercury MotorSports, they really do know what they are doing, have alot for friends go there. Open on Saturday as well!!!

matty spry at pits...

He tuned my SR20 silvia and its running a reliable 11.1@131mph, going back for a bit of an angry tune in search of 10s...

I have been going to him ever since i got my car, he has helped me out from day 1 when my car had a simple T28 setup, to my now setup with a full built motor and larger turbo.

mercury orginally tuned my car, was ok

much happier with the retune matty spry did

just not that convenient driving down the coast to get it done, but definately worth the extra cash

Charlies Motors @ Wollongabba. They tune our racecar...rb30det making...sorry was making 365rwkws no problems. Charlie and Dave, father and son team, you cant go wrong with family businesses, i know cause im in one also haha. The old man there used to race cars and bikes in all sorts so they know there way around race setups. They are fairly priced and tune spot on. They are right into the drift stuff now also, theres a few drift cars there every bloudy week.

+1 for them from me.

We jumped from Mercury to Charlies...But id give a +1 for Matty also. I know heaps of guys at the track who goto him and cant recommend him enough. -1 for MM :)

Edited by r33_racer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...