Jump to content
SAU Community

Lotss Of Lotss Of Parts


Recommended Posts

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

RB25 DET HEAD COMPLETE (including Inlet manifold,Coils,Centre Cover,Tappet Covers) $600

You still got this? Is it in good condition, what year engine (series 1 or 2) and does it have VCT?

still got this item

and sorry everyone

i havent been all there since someone tried stealing my r33 and smashing it 100 metres away from the workshop

but all items have been sent now

if items are not seen by friday please let me know

all items sent via tnt

Link to comment
Share on other sites

  • 2 weeks later...
ummmmm

i said ill give them to you if i find them

and i didnt but im being nice and once the new ones come in hopefully this week i will send u new ones

im not knocking you mate, your a top bloke, im just a bit frustrated as you said you had posted them and last time i called you said you were going to chase them up and find out where they were and call me back in 10..... now your not answering my calls or sms.... i just want to be kept in the loop, bit frustrating when i was told they bolted straight on and then i find out i need spacers, hub rings and new nuts which i expected at the least..

Link to comment
Share on other sites

After the Standard R33 GTST WING S2 does the LED light work also has everyone got there parts is it safe to buy?

Thanks

John

3 people havent

but will either have a money order returned

or there items there by friday

thanks

and i do have the wing

the led works

if u want it organise your own frieght as im having bad luck with mine

thanks

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • hey GTSboy thanks for the quick reply. im on stock ECU  Surprisngly enough i unplug everything and replug everything, readings are still off but the car drove...ok haha So far this is what i have done. - Replaced ECU (still 1.5v) - Replaced Boost sensor (still 1.5v) Now the next thing i tried is to unplug the TPS and only plug in the Boost sensor to see if it reads 5v. No it still only read 1.5v.  Its a new boost sensor and i know i have 5v if i dont plug the sensor back in, so that means the power wire is good. So now im thinking that it might be a bad ground on the boost sensor plug.  on the FSM says the ground to the boost sensor is  a sensor ground, can i add a ground wire from the boost sensor ground wire to the the engine itself to ground it? or chassis?
    • OK, so, assuming that there is nothing wrong with either the original or new boost sensor, then it would seem that there might be something wrong in the loom wiring to that sensor. This is troublesome, because if that were true, then you might expect the problem to persist when the sensor was unplugged. But seeing as the voltage comes good when it is unplugged, it would suggest that the fault might (and I stress might) be right at the loom plug. Either that, or the fault might be at the ECU, on the line in from the boost sensor. When you unplug the boost sensor, that input at the ECU is isolated from the TPS sensor and can't affect it. This would be semi-bad, as an ECU problem is never welcome, but at least you'd know where the problem is and it might be fixable, or at least replaceable. Do you have Nistune, or any other way of looking at ECU data? I'd want to drive the car around with the boost sensor unplugged and see the TPS working properly, then not working properly with the sensor plugged back in. You're not trying to run more than ~18 psi either? Right? Because even with Nistune that can be difficult with the boost sensor connected. Just checking, in case it might have some bearing on the issue. It shouldn't cause the voltage situation you're seeing though.
    • Need something reliable, like a Mazda (non-rotary), or a Honda, or a .......... Commodore 🤣, the only issue with my cars is me 🫤
    • Then sell it and buy a BMW! I can totally relate to this (except the money part! ). I think for me I need to remind myself that I do enjoy the process and to stop being so damn impatient and eager to get it done. That just leads to frustration and broken stuff.  Built not bought. Wait.  Fixed, not fought? No ... Definitely fighting things. Definitely not fixed, I give up. Cars are pain.  
×
×
  • Create New...