Jump to content
SAU Community

Recommended Posts

  • Replies 72
  • Created
  • Last Reply

Top Posters In This Topic

and what production years were Series 1 and Series 2?

I'm guessing;

1998-2000 Series I

1998-2002 Series II

yes/no?

Does anyone have Series II 2dr images?

Series 1 = 1998 - 2000

Series 2 = 2000 - 2002

My 34 is a 3/2000 and is a S1 so im guessing the SII came out from about june 2000 or so

the one on the right is not standard either, its got the nismo 300km/h speedo! and perhaps nismo centre gauges too although its blurry.

Thanks for all the info guys.. appreciate it.

Few years ago i brought a lemon s1 R33, had it for a year but it took me months to sell it, had too many problems. I was told the car had been in a major accident in japan (i was the first oz. owner) by a panel beater when i took the car in for a small spray job. Thank god, i got rid of the car for the same price i brought it..

With my next car, i will be doing my h/w and hopefully I'll come across a clean healthy black 34.

What was the production years for 34's? 1998 till 2000? Isn't that a bit short? So V35's begun in 2001 ?

Can some one tell me what on earth Xenon head lights are, lol i have no idea what they are or what they do.

Abo Bob

From the site you gave above.. what i've noticed is theres two different interior styles.. is the left one optional and the right standard?

R34GTTinfo_interior2.jpgR34GTTinfo_interior.jpg

Forged..

Thanks for the info :happy:

R34 GT-S, is this a series 1 or 2? .. such a beautiful colour though :) Its a pity this colour didn't come with GT-T's

Oh but it did.... in series 2 (I'm fairly sure)

I've seen the odd Bayside Blue series 1 but I've never been sure if they came with that colour from factory

Want to see hotness.... picture a midnight purple GT-t

Forged..

Thanks for the info :happy:

R34 GT-S, is this a series 1 or 2? .. such a beautiful colour though :) Its a pity this colour didn't come with GT-T's

mtrd_1.JPG

Judging from the pics, the front bar and steering wheel are definately S1. And yes, the GTT's did come in Bayside blue. One of the forum members has one.

My god.. that s2 bar does look shocking, you would expect the s2 bar to look better but a nice after market should fix all that up.

I'm hooked on this bayside blue color.. even if they did come with that colour from factory in s2 gt-t's id presume they still would be very rare to come by

Edited by pretender-
My god.. that s2 bar does look shocking, you would expect the s2 bar to look better but a nice after market should fix all that up.

I'm hooked on this bayside blue color.. even if they did come with that colour from factory in s2 gt-t's id presume they still would be very rare to come by

r34 gt-t's came in TV2 Bayside for both series I and II but only for series I's built in 2000 like mine

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
×
×
  • Create New...