Jump to content
SAU Community

Recommended Posts

Hey all

I've had a look round SAU and i cant really find anything to answer my question.

What is the law for nitrous fitted to a street registered vehicle in WA...i believe its illegal but i've heard people saying you can have it installed but the lines disconnected from the bottle. Is this true?

I've seen heaps of cars at shows with NOS which are people daily drivers and wondering what they do to get around cops.

Does anyone know of who i can contact to find 100% correct information?

Cheers for and info people can give me

Link to comment
https://www.sau.com.au/forums/topic/142696-nitrous-laws-in-wa/
Share on other sites

Try Hyperdrive or Top Racing - the guys there will know what's street legal.

A while ago my nutty mechanic mate had just about convinced me to chuck a 50HP shot of nos in my 33 but my other mechanically minded friend just looked at me and said "SASHA NO it's illegal and it puts a lot of pressure on your engine." Lol so I didn't really take the idea much further

Yep contact the actual govmt agency for confirmation as everyone seems to have different interpretations of the rules and regs. I'd find out what the ADRs say about it and then contact the road authority in WA to see what their view on it is.

To my knowledge it is illegal to have ANY part of a nitrous system installed in a car on the road whether the bottle is connected or not.

Nitrous kit fitted to car is illegal to drive on public roads in WA.

Installations I have had a part in have all been 'invisable'. I don't believe in driving around with the stuff on the road. It's something like planting the foot real hard and breaking the speed limit that you should do at the track.

I fitted my kit on my old R33 gtst and everything was hidden real well. The kit was sold to 2rismo who now runs mid 11's with it and the stock turbo.

I'm preety sure its illegal $10,000 fine I think same as removing airbag steering wheel...as dan mentioned, you can have the set up in the engine bay but cannot be connected to a nos bottle....can try blowing air as you drive..

puff puff~~

subwoofer box has been done before, to conceal the bottle. It needs to be vented. The problem is that driving around with nitrous connected is that in the event of an accident, not even your fault, you may face charges and the insurance company will not cover the cars repair. Not to mention that nitrous oxide is an accelerant when it comes to any kind of fire you may have and the bottle can explode if heated too much by the event of a fire etc.

My 2c is get a kit if you like but, forget running around on the street with it. Save that fun for the drags.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...