Jump to content
SAU Community

Rb20det Turbo $150, Oil Line $30, Injectors $75

CEF11E
 Share

Recommended Posts

CEF11E Veteran

CEF11E

Posted
Posted (edited)

I have just done some upgrades and have the following for sale

1. RB20DET turbocharger 110,000 k's no shaft play good condition was running on my car with no problems. Comes with wastegate and elbow $150

2. Oil line to suit RB20/25 turbo. perfect if you need to mod your lines. $30 I know that's heaps but I will hold onto it as a spare if its not worth that to someone

3. Stock RB20DET injectors 110,000 k's they have been cleaned and serviced at some stage as they have new pintle caps on them, they are in really good condition. I will clean them ultrasonically free for the buyer $75

here are the pics of the turbo, injectors and oil line.

car007.jpg

car005.jpg

car004.jpg

car003.jpg

car002.jpg

car001.jpg

all parts can be shipped

Thanks!

Edited by CEF11E
CEF11E Veteran

CEF11E

Posted
  • Author
Posted (edited)
Hey im interested in the turbo and injectors, for my L24eT project!

Can you send me a few pics first?? im in Melbourne 3134, can you get postage estimate??

Regards,

Andrew :)

Hi Andrew, no probs will get some pics for you tonight. I will post them for you for free if you buy turbo + injectors. :D

Edited by CEF11E
CEF11E Veteran

CEF11E

Posted
  • Author
Posted (edited)

pics in first post of thread

comes with

Turbocharger

Wastegare Actuator

Turbo Elbow

Water line banjo bolts

Turbo elbow gasket

The oil line will bolt straight up to this turbo

The injectors are in excellent condition and were running perfectly on my car. I can also have them ultrasonic cleaned for free as I have an ultrasonic cleaner :) normally getting them cleaned cost $100.

take the lot for $250 delivered. :)

cheers!

Edited by CEF11E
Factory 5 Mentor

Factory 5

Posted
Posted

Great pics mate!

I just need to find out when and how much boost my L24 will get... it might be too small, but it looks to be in really good condition....

Does it have ball bearings?

And are there ways to modify it? (like differeent size compressor wheel???)

thanks,

Andrew

CEF11E Veteran

CEF11E

Posted
  • Author
Posted

Cheers Andrew. It will provide enough flow for 160rwkw. and it will be ultra punchy. it is a ball bearing turbo and all parts are in excellent condition. you can run up to 14psi.

you could mod it but if 160 is not enough honestly you are better off going a bigger turbo to start with, but if you really wanted you can get the compressor cover bored out or get one from an rb25 turbo (direct fit) and put a larger comp wheel, rb25 or even to4E V trim. but you will be getting awful close to surge with this wheel :huh: but the bearings and shaft/wheel are in excellent condition and at $150 you can't loose :)

Cheers mate.

JVP Grand Master

JVP

Posted
Posted

Turbocharger

Wastegare Actuator

Turbo Elbow

Water line banjo bolts

Turbo elbow gasket

The oil line will bolt straight up to this turbo

The injectors are in excellent condition and were running perfectly on my car. I can also have them ultrasonic cleaned for free as I have an ultrasonic cleaner smile.gif normally getting them cleaned cost $100.

take the lot for $250 delivered. smile.gif

everything above still for sale?

cheers

jarryd

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      NC MX5

      By MBS206 · Posted

      Ha ha ha, that's fair mate! We have the crackhead dogs now. Mainly because the missus wants the crazy dogs while she still has the energy and capacity to be able to keep up with them! Ha ha our current two are both Working GSD, there brothers and sisters (from the same litters) are in Police, Corrective Services, and I believe one did end up in defence force too. They're wild and fun, yet right now, both curled up asleep on the lounge room floor while we watch some TV. Mal is very likely the next dog (unless I get my couch potato guardian dog 😛 )   What are your Kitties names? Are you planning some house work, like those high kitty shelves, built in scratching post, and some cat passages from one room to another room?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Maine Coone, did look at but to big and fluffy As for performance dogs, we had Mals at work, performance dogs are fun to watch, but, way to much work for this old rooster
    • sonicii
      Who has a Infiniti Q60, Q50 (V37)?

      By sonicii · Posted

      Yep, it was only an option on the Q50 Hybrid.  Same in Japan as far as I know. And doesn't use a centre diff like the Suby's do, so not the same as the WRX.  But it also isn't a reactive AWD like other Nissan AWD vehicles are, eg. Murano/Xtrail/etc.
    • MBS206
      NC MX5

      By MBS206 · Posted

      You should have got a Maine Coone then. Only thing is they're big. But so cool, and just like a dog. Or, just get yourself a high performance dog. That'll teach you for wanting Parkour indoors 😛
    • MBS206
      UniClutch

      By MBS206 · Posted

      Are you thinking of Bens R32? I don't remember if his went through the bonnet itself, but it went through the chassis rail. Brad (RISKIN) bought it, and turned it into a track car. It's funny how anti people are of Jim Berry now. I remember when I pulled mine out (during an engine change) and inspected it and found it cracking badly. At that point in time so many people were even on SAU, were so pro Jim Berry, and that was after Bens GTR exploded his quite publically.
×
×
  • Create New...