Jump to content
SAU Community

Recommended Posts

hey guys

went to the car this morning to drive to work and its sitting in a small pool of clear/greenish fluid. had to rush to the train so i only had a quick look but it seems to be dripping from the gearbox casing.. any ideas what it may be?green usually is coolant, but it could be brake/clutch fluid or gearbox?

il have a better look tonight when i get a chance, but does anyone have a rough idea what could be busted?

james

Link to comment
https://www.sau.com.au/forums/topic/143630-fluid-leak/
Share on other sites

It seems to be the same problem me and Tay are having at the moment with the coolant leak from the heater pipes at the back of the engine. I first noticed it was dripping off my gearbox but it was leaking all the way down from the top of the engine (at the back) first.

Gearbox fluid is tranluscent red.

Link to comment
https://www.sau.com.au/forums/topic/143630-fluid-leak/#findComment-2680270
Share on other sites

ok got under the car this mornin and im a bit baffled... checked coolant and it seemed fine, see in the pic more than just a drip was lost, prob like a litre or 2.. couldnt really see any leaks from any hoses thos. took it fro a drive and ive left it now so il see if there are any more leaks after it sits for a bit

on a side note (see other pic) is my clutch slave leaking? looks like it, im a bit of a noob...

james

ps sorry pix are from my phone

post-23423-1163810196.jpg

post-23423-1163810670.jpg

Edited by RCEBNR
Link to comment
https://www.sau.com.au/forums/topic/143630-fluid-leak/#findComment-2682553
Share on other sites

Gearbox oil is yellow if its fresh, auto fluid is red (ATF), brake/clutch fluid can be yellow/green, coolant can be green/red (normally only toyota coolant is red). Its hard to tell but the clutch slave looks shiney which indicates wetness, peel back the boot and see if any fluid comes out..if it does you need a new slave cylinder. If its coming from higher then its most likely coolant from the heater hoses etc.

Now that ive seen the second picture and the way it looks to be drying on the ground i say coolant.

After a second look at the first pic the slave looks to be new too LOL.

Edited by Godzilla32
Link to comment
https://www.sau.com.au/forums/topic/143630-fluid-leak/#findComment-2683017
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...